ProForm Performance 600i Treadmill Enc Manual - Page 13
Make sure not
View all ProForm Performance 600i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
10. Remove the 5/16" Nut (12) and the 5/16" x 2 1/4" Bolt (3) from the bracket on the Latch Crossbar (38). Align the upper end of the Storage Latch (53) with the bracket on the Latch Crossbar (38), and insert the 5/16" x 2 1/4" Bolt (3) through the bracket and the Storage Latch. This will push a spacer (I) out of the Storage Latch; discard the spacer. Next, tighten the 5/16" Nut (12) onto the 5/16" x 2 1/4" Bolt (3). Do not overtighten the Nut; the Storage Latch (53) must be able to pivot. Then, lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 25). 10 12 I 38 3 56 53 11. Set the console assembly (J) on the Left and Right Handrails (86, 87). Make sure not to 11 J pinch any wires (K, 81). Attach the console assembly (J) with four 5/16" x 1/2" Screws (4) and four 5/16" Star Washers (11); do not tighten the Screws yet. K 86 87 11 11 81 4 4 13