ProForm Performance 800i Instruction Manual

ProForm Performance 800i Manual

Get ProForm Performance 800i PDF manuals and user guides View all ProForm Performance 800i manuals
Add to My Manuals
Save this manual to your list of manuals

ProForm Performance 800i manual content summary:

  • ProForm Performance 800i | Instruction Manual - Page 1
    No. Write the serial number in the space above for reference. Serial Number Decal CUSTOMER SERVICE UNITED KINGDOM Call: 0330 123 1045 From Ireland: 053 92 36102 Website: iconsupport.eu 2153 AUSTRALIA CAUTION Read all precautions and instructions in this manual before using this equipment. Save this
  • ProForm Performance 800i | Instruction Manual - Page 2
    ASSEMBLY 7 HOW TO USE THE TREADMILL 17 HOW TO FOLD AND MOVE THE TREADMILL 29 MAINTENANCE AND TROUBLESHOOTING number on the front cover of this manual and request a free replacement decal. Apply the decals may not be shown at actual size. PROFORM and IFIT are registered trademarks of ICON Health &
  • ProForm Performance 800i | Instruction Manual - Page 3
    all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no problems. 12. Wear appropriate exercise clothes while using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support
  • ProForm Performance 800i | Instruction Manual - Page 4
    ing the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized
  • ProForm Performance 800i | Instruction Manual - Page 5
    Thank you for selecting the new PROFORM® PERFORMANCE 800I treadmill. The PERFORMANCE 800I treadmill provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. reading this manual, please see the front cover of this manual. To help us assist you
  • ProForm Performance 800i | Instruction Manual - Page 6
    parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see whether it is preattached. Extra parts may
  • ProForm Performance 800i | Instruction Manual - Page 7
    assembly steps. • After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill do not have internet access, call Customer Service (see the front cover of this manual). To register your product and activate your
  • ProForm Performance 800i | Instruction Manual - Page 8
    2. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (80) to the front of the Base (88). Next, identify the Right Upright (79). Have a second person hold the Right Upright near the Base (88). See the inset drawing. Tie the wire tie (A) in the Right Upright (79)
  • ProForm Performance 800i | Instruction Manual - Page 9
    4. Set the Right Upright (79) on the Base (88) as shown. Make sure not to pinch the Upright 4 Wire (80). Then, slide the Right Upright so that the 3/8" x 2 3/8" Screw (2) in the Base is inserted into the slot in the Right Upright. Do not tighten the Screw yet. 5. Attach the Right Upright (79)
  • ProForm Performance 800i | Instruction Manual - Page 10
    6. Remove and save the four indicated 5/16" x 3/4" Screws (13). 6 Identify the Left and Right Base Covers (94, 95). Slide the Left Base Cover onto the Left Upright (78), and slide the Right Base Cover onto the Right Upright (79). Do not press the Base Covers into place yet. 13 78 94 13 79 95 7.
  • ProForm Performance 800i | Instruction Manual - Page 11
    9. Set the Console Base (97) face down on a soft surface to avoid scratching the Console Base. 9 Remove and discard the two indicated screws (F). Then, remove the Pulse Crossbar (75). Next, identify the Left and Right Trays (85, 86). Attach the Trays to the Console Base (97) with 13 eight #8 x
  • ProForm Performance 800i | Instruction Manual - Page 12
    DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie (A) 72 from the Upright Wire. I 76 80 75 A 76 H 12. Set the console assembly (G) on the Handrails (72). Make sure that no wires are pinched. Insert the excess Upright Wire (80) into the console
  • ProForm Performance 800i | Instruction Manual - Page 13
    Start two #8 x 3/4" Screws (11) into the left Handrail and the Left Handrail Cover. Next, slide the Left Handrail Cover forward against the console assembly (G) as shown. Then, tighten both Screws. Then, attach the Left Handrail Bottom (73) to the Handrail (72) with two #8 x 3/4" Screws (11). Attach
  • ProForm Performance 800i | Instruction Manual - Page 14
    from the Latch Crossbar (51). Next, orient the Latch Crossbar (51) as shown. Make sure that the "This side toward belt" sticker (K) is facing the treadmill. Attach the Latch Crossbar to the brackets (L) on the Frame (54) with the two 5/16" x 3/4" Screws (13) that you just removed and two 5/16" Star
  • ProForm Performance 800i | Instruction Manual - Page 15
    be able to pivot. Then, lower the Frame (54) (see HOW TO LOWER THE TREADMILL FOR USE on page 29). 17 14 N 51 26 54 52 18. Press the two tabs on the Tablet Holder (91) into the slots (O) in the console assembly (G). Attach the Tablet Holder (91) with four M4 x 16mm Screws (12). Note:
  • ProForm Performance 800i | Instruction Manual - Page 16
    , remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 31
  • ProForm Performance 800i | Instruction Manual - Page 17
    the steps below to plug in the power cord. 1. Plug the indicated end of the power cord into the socket on the treadmill. Socket on Treadmill DANGER: Improper connection of the equipment-earthing conductor can result in an increased risk of electric shock. Check with a qualified electrician or
  • ProForm Performance 800i | Instruction Manual - Page 18
    access many other features. When you use the manual mode, you can change the speed and incline of the treadmill with the touch of a button. As you . Each workout automatically controls the speed and incline of the treadmill as it guides you through an effective exercise session. You can even listen
  • ProForm Performance 800i | Instruction Manual - Page 19
    Press the power switch into the reset position. Reset Next, stand on the foot rails of the treadmill. Locate the clip (A) attached to the key (B), and slide B the clip securely onto the waistband SECTION on page 26. For simplicity, all instructions in this section refer to kilometers. 19
  • ProForm Performance 800i | Instruction Manual - Page 20
    for or log into your iFit account. 4. Tour the console. The first time you turn on the treadmill, dialogue boxes on the screen will guide you through the features of the console. To use the manual mode, see page 21. To use a map workout, see page 23. To use a draw your own map
  • ProForm Performance 800i | Instruction Manual - Page 21
    MANUAL MODE 4. Change the incline of the treadmill as desired. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 19. Note: It may take some time for the console to be ready for use. To change the incline of the treadmill the speed. Touch the Manual Start button on the screen
  • ProForm Performance 800i | Instruction Manual - Page 22
    monitor at the same time, the chest heart rate monitor will have priority. Note: The console is compatible with Bluetooth® Smart heart rate monitors. When you are finished using the treadmill, press the power switch into the off position and unplug the power cord. IMPORTANT: If you do not do this
  • ProForm Performance 800i | Instruction Manual - Page 23
    handrails and begin walking. During the workout, a map on the screen will show your progress. The workout will function in the same way as the manual mode (see pages 21 to 22). When you reach the end of the workout, the walking belt will slow to a stop, and a workout summary will
  • ProForm Performance 800i | Instruction Manual - Page 24
    If you make a mistake, you can use the Undo button on the left side of the screen. The screen will display the elevation and distance statistics for your workout. If desired, you can change the default speed. HOW TO USE A DISTANCE OR TIME WORKOUT Note: To use a distance or time workout, the console
  • ProForm Performance 800i | Instruction Manual - Page 25
    5. Select a distance or time workout that you have previously added to your schedule on iFit.com. Touch the calendar icon to download a distance or time workout from your schedule. Note: Before workouts will download, you must add them to your schedule on iFit.com. HOW TO USE THE WORKOUT SETTINGS
  • ProForm Performance 800i | Instruction Manual - Page 26
    wireless network. The update will begin automatically. IMPORTANT: To avoid damaging the treadmill, do not turn off the power or remove the key while the will show the progress of the update. When the update is complete, the treadmill will turn off and then turn back on. If it does not, press
  • ProForm Performance 800i | Instruction Manual - Page 27
    Then, touch the Begin button to calibrate the incline system. The treadmill will automatically rise to the maximum incline level, lower to the an 802.11b/g/n router with SSID broadcast enabled (hidden networks are not supported). When a list of networks appears, touch the desired network. Note:
  • ProForm Performance 800i | Instruction Manual - Page 28
    recommended; performance depends on connection speed. Note: If you have questions after following these instructions, go to support.iFit.com monitor, please see the front cover of this manual. N0te: The console is compatible with all Bluetooth Smart heart rate monitors. 5. Exit the wireless network
  • ProForm Performance 800i | Instruction Manual - Page 29
    the arrow below. CAUTION: Do not hold the frame by the plastic foot rails. Bend your legs and keep your back straight. 1 Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the storage latch is in the locked position. Moving the
  • ProForm Performance 800i | Instruction Manual - Page 30
    then plug it back in. c. Remove the key from the console, and then reinsert it. d. If the treadmill still will not run, please see the front cover of this manual. TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the
  • ProForm Performance 800i | Instruction Manual - Page 31
    tightened. b 2-3 in. C c. Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform unless instructed to do so by an authorized service representative. Such substances may
  • ProForm Performance 800i | Instruction Manual - Page 32
    d. If the walking belt still slows when walked on, see the front cover of this manual. SYMPTOM: The treadmill will not connect to the wireless network a. Make sure that the wireless settings on the console are correct (see page 27). b. Make sure that the
  • ProForm Performance 800i | Instruction Manual - Page 33
    over age 35 or persons with pre-existing health problems. The heart rate monitor is not a medical . You can use your heart rate as a guide to find the proper intensity level. The chart to strengthen your cardiovascular system, you must perform aerobic exercise, which is activity that requires large
  • ProForm Performance 800i | Instruction Manual - Page 34
    Nut #8 Clip 3/8" Jam Nut 3/8" x 2 1/2" Bolt Left Foot Rail Right Foot Rail Platform Cushion Caution Decal Rear Roller Walking Platform Walking Belt Belt Guide Front Roller/Pulley 3/8" Pin 9/32" Plastic Bushing Controller Plate Plastic Tie Model No. PETL99819.0 R0719A Key No. Qty. 51 1 52 1 53
  • ProForm Performance 800i | Instruction Manual - Page 35
    Motor Bushing #8 Nut Controller Clamp 107 3 108 1 109 1 110 1 111 1 * - #8 x 1/2" Machine Screw Filter Motor Isolator Ferrite Clamp Receptacle User's Manual Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of
  • ProForm Performance 800i | Instruction Manual - Page 36
    36 92 18 40 93 29 19 25 36 92 18 40 38 93 100 47 25 29 36 18 17 101 48 102 27 45 23 29 33 19 43 19 7 41 13 33 29 19 44 29 46 39 33 19 33 15 19 18 42 56 11 15 19 25 29 19 29 36 19 55 14 7 13 18 92 40 93 29 54 19 52 18 11 26 53 103 104 22 49 105 25 15
  • ProForm Performance 800i | Instruction Manual - Page 37
    EXPLODED DRAWING B Model No. PETL99819.0 R0719A 35 11 11 11 11 11 35 11 35 57 11 11 58 11 59 60 20 32 36 62 61 63 21 64 36 11 11 65 67 11 111 68 11 69 36 36 32 60 59 62 66 11 11 11 37
  • ProForm Performance 800i | Instruction Manual - Page 38
    EXPLODED DRAWING C Model No. PETL99819.0 R0719A 70 72 11 73 11 5 7 11 9 8 75 7 11 13 7 13 7 13 77 78 76 1 76 1 11 11 13 7 11 71 7 13 72 9 8 5 7 94 37 82 2 4 6 87 7 16 11 60 6 82 74 11 6 11 3 110 83 81 18 80 13 80 79 60 16 82 3 6 81 84 18 90 36 88 36 90 82
  • ProForm Performance 800i | Instruction Manual - Page 39
    EXPLODED DRAWING D 10 10 31 97 11 Model No. PETL99819.0 R0719A 85 91 10 11 12 10 10 11 86 10 11 11 98 11 96 11 28 99 11 28 28 28 28 28 39
  • ProForm Performance 800i | Instruction Manual - Page 40
    ) • the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the end of this manual) RECYCLING INFORMATION This electronic product must not be disposed of in municipal waste. To preserve the environment, this product must be recycled after its useful
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
USER’S MANUAL
Model No. PETL99819.0
Serial No.
Write the serial number in the space
above for reference.
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Save this
manual for future reference.
Serial Number
Decal
CUSTOMER SERVICE
UNITED KINGDOM
Call:
0330 123 1045
From Ireland:
053 92 36102
Website:
iconsupport.eu
E-mail:
Write:
ICON Health & Fitness, Ltd.
Unit 4, Westgate Court
Silkwood Park
OSSETT
WF5 9TT
UNITED KINGDOM
AUSTRALIA
Call:
1800 993 770
E-mail:
Write:
ICON Health & Fitness
PO Box 635
WINSTON HILLS NSW 2153
AUSTRALIA
iconeurope.com