ProForm Performance 800i Instruction Manual - Page 15

17. Remove the 5/16" Nut (14) and the 5/16" x 2 1/4" Bolt (26) from the bracket on the Latch Crossbar (51). Align the upper end of the Storage Latch (52) with the bracket on the Latch Crossbar (51), and insert the 5/16" x 2 1/4" Bolt (26) through the bracket and the Storage Latch. This will push a spacer (N) out of the Storage Latch; discard the spacer. Next, tighten the 5/16" Nut (14) onto the 5/16" x 2 1/4" Bolt (26). Do not overtighten the Nut; the Storage Latch (52) must be able to pivot. Then, lower the Frame (54) (see HOW TO LOWER THE TREADMILL FOR USE on page 29). 17 14 N 51 26 54 52 18. Press the two tabs on the Tablet Holder (91) into the slots (O) in the console assembly (G). Attach the Tablet Holder (91) with four M4 x 16mm Screws (12). Note: Start the two top Screws first, and then start the two bottom Screws. Be careful not to overtighten the Screws. IMPORTANT: The Tablet Holder (91) is designed for use with most full-size tablets. Do not place any other electronic device or object in the Tablet Holder. 18 Start First 12 91 OG 15