ProForm Power 995i Instruction Manual - Page 13

May Become Damaged When You Turn

Page 13 highlights

12. Attach the console assembly (J) to the Left and Right Handrails (86, 87) with four #10 x 3/4" 12 Screws (9) and four #10 Star Washers (5); start all four Screws, and then tighten them. J 9 5 86 9 5 87 13. See the inset drawing. Connect the Upright Wire (81) to the console wire (K). The connec- 13 tors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, firmly tighten the four 5/16" x 1/2" Screws (4) (only two are shown). 4 81 K K 81 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

13
12.
Attach the console assembly (J) to the Left and
Right Handrails (86, 87) with four #10 x 3/4"
Screws (9) and four #10 Star Washers (5);
start
all four Screws, and then tighten them.
5
12
5
9
J
86
87
13.
See the inset drawing.
Connect the Upright
Wire (81) to the console wire (K).
The connec-
tors should slide together easily and snap
into place.
If they do not, turn one connector
and try again.
IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER.
Then, firmly tighten the four 5/16" x 1/2"
Screws (4) (only two are shown).
81
81
K
13
4
K
9