ProForm Premier 1300 Uk Manual - Page 10
fully tighten the, Screws., Make sure, that the Upright Wire 81 is not pinched., Fully tighten
View all ProForm Premier 1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
6. Identify the Left Handrail (86). Attach the Left Handrail (86) to the Left Upright (89) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11); fully tighten the Screws. Next, insert the Upright Wire (81) through the hole in the bottom of the Right Handrail (87) as shown. Attach the Right Handrail (87) to the Right Upright (90) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11). Make sure that the Upright Wire (81) is not pinched. Fully tighten the Screws. Then, remove the wire tie (A) from the Upright Wire (81). 6 28 11 86 28 89 11 81 87 A 90 7. If there are four screws (E) in the locations shown, remove and discard them. 7 E E 10
10
6.
Identify the Left Handrail (86).
Attach the Left Handrail (86) to the Left Upright
(89) with two 5/16" x 2 1/2" Screws (28) and
two 5/16" Star Washers (11);
fully tighten the
Screws.
Next, insert the Upright Wire (81) through the
hole in the bottom of the Right Handrail (87) as
shown.
Attach the Right Handrail (87) to the Right
Upright (90) with two 5/16" x 2 1/2" Screws (28)
and two 5/16" Star Washers (11).
Make sure
that the Upright Wire (81) is not pinched.
Fully tighten the Screws.
Then, remove the wire tie (A) from the Upright
Wire (81).
90
A
6
87
86
89
81
11
28
11
28
7.
If there are four screws (E) in the locations
shown, remove and discard them.
7
E
E