ProForm Restoration 600 Canadian English Manual
ProForm Restoration 600 Manual
 |
View all ProForm Restoration 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
ProForm Restoration 600 manual content summary:
- ProForm Restoration 600 | Canadian English Manual - Page 1
to you. CUSTOMER HOT LINE: 1-888-936-4266 Mon.-Thu., 8:00 am-6:30 pm; Fri., 8:00 am-6:00 pm EST CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Patent Pending USER'S MANUAL SEARS CANADA, INC., TORONTO, ONTARIO M5B 2B8 - ProForm Restoration 600 | Canadian English Manual - Page 2
ultraviolet rays while the spa is empty; damage to the pump, motor, plumbing, and components due to improper maintenance, chemical treatment, or exposure; damage resulting from failure to properly follow user's manual installation, operating, or maintenance instructions. Also excluded are consumable - ProForm Restoration 600 | Canadian English Manual - Page 3
TABLE OF CONTENTS LIMITED WARRANTY 2 IMPORTANT SAFETY INSTRUCTIONS 4 WARNING LABEL IDENTIFICATION 6 BEFORE YOU BEGIN 7 CHOOSING A LOCATION FOR THE RESTORATION 600 8 ASSEMBLY 9 USING THE RESTORATION 600 11 MAINTENANCE 14 TROUBLE-SHOOTING 15 CUSTOMER RECORD 19 ORDERING REPLACEMENT PARTS - ProForm Restoration 600 | Canadian English Manual - Page 4
FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure that all users of the RESTORATION 600 are adequately informed of all precautions. 2. Use the RESTORATION 600 only as described in this manual. 3. The RESTORATION 600 is intended for home use only. Do not use the spa in any - ProForm Restoration 600 | Canadian English Manual - Page 5
pressure, circulatory problems, or diabetes to consult your physician before using this product. 32. If you feel pain or dizziness at any time while using the RESTORATION 600, discontinue use and contact a physician. WARNING: Read all instructions before using the RESTORATION 600. ICON assumes - ProForm Restoration 600 | Canadian English Manual - Page 6
on the side of the spa jet unit of the RESTORATION 600. Locate the labels and familiarize yourself with this information. The label on the side of the spa jet unit is an adhesive decal. If this decal is missing, or if it is not legible, please call our Customer Service Department toll-free at - ProForm Restoration 600 | Canadian English Manual - Page 7
benefit, read this manual carefully before using the PROFORM® RESTORATION 600. If you have additional questions, please call our Customer Service Department toll-free found on a decal attached to spa jet unit (see the front cover of this manual). Before reading further, please familiarize yourself - ProForm Restoration 600 | Canadian English Manual - Page 8
able to support the weight of the RESTORATION 600 when it is filled with water, plus the weight of the occupants. The RESTORATION 600 weighs approximately the RESTORATION 600 to permit servicing of the unit. The diameter of the tub is 69". You should allow for this size, plus the size of the spa jet - ProForm Restoration 600 | Canadian English Manual - Page 9
assembly, carefully read the following information and instructions: • Assembly requires two people. • Spa Surround. Insert the Inflatable Spa Liner (9) into the Fabric Spa Surround. Align the valve in the Inflatable Spa Liner with the hole in the Fabric Spa Surround. Flip the flap on the Fabric Spa - ProForm Restoration 600 | Canadian English Manual - Page 10
covered with water. Do not fill the RESTORATION 600 more than 20" deep with water. After the RESTORATION 600 is full, you must prime the Spa Jet Unit (13) before using the RESTORATION 600 (see PRIMING THE SPA JET UNIT on page 10). 5. Insert the Support Ball (4) into the mesh pocket on the underside - ProForm Restoration 600 | Canadian English Manual - Page 11
console to the lowest setting (see USING THE CONSOLE on the next page). The pumping unit will heat the water as it pumps. Cover the RESTORATION 600 with the spa cover. The spa cover must be tight. The water will heat at about 1.7°F an hour with the cover on. If you are using the - ProForm Restoration 600 | Canadian English Manual - Page 12
-chlorine Shox" bottle to the water in the spa. Allow the water to circulate for five minutes. You should now test the pH level of the water. Use the included test strips to check the pH of the water. Refer to the instructions on the test strip packaging to see how to - ProForm Restoration 600 | Canadian English Manual - Page 13
been operated for three hours, the pump will begin circulat- DRAINING THE PUMP After the RESTORATION 600 is drained (see DRAINING THE RESTORATION 600 above), the pump in the spa jet unit should also be drained if the spa will be stored for more than thirty days, or if it may be exposed to freezing - ProForm Restoration 600 | Canadian English Manual - Page 14
pH level, between 7.2 and 7.8, in the RESTORATION 600. Severe problems can occur when the pH balance is not instructions with your test strips or pH test kit for additional information about testing and adjusting the pH. SANITIZING THE RESTORATION 600 Please refer to your local pool and spa - ProForm Restoration 600 | Canadian English Manual - Page 15
pump may have a bad bearing. Contact our customer service department. 6. SYMPTOM: THE WATER DOES NOT HEAT a. The heater is attached to the pump in the spa jet unit. If the pump is operating, the water should heat. Cover the RESTORATION 600 a. Adjust the water level. This usually occurs only when - ProForm Restoration 600 | Canadian English Manual - Page 16
, or if you notice wetness on the floor around the RESTORATION 600, then the liner may have a leak. Locate the leak, and patch it using a pool patch kit that you can purchase at any pool and spa supply store. b. A clamp or seal inside the spa jet may be loose. Check the floor around the - ProForm Restoration 600 | Canadian English Manual - Page 17
NOTES 17 - ProForm Restoration 600 | Canadian English Manual - Page 18
NOTES 18 - ProForm Restoration 600 | Canadian English Manual - Page 19
CUSTOMER RECORD Model No.: Retailer Name: Retailer Address: Serial No.: Purchase Date: ICON of Canada Inc. 900 de l'Industrie St-Jérôme, Québec Canada, J7Y 4B8 PLACE STAMP HERE 19 - ProForm Restoration 600 | Canadian English Manual - Page 20
PARTS To order replacement parts, simply call our Customer Service Department toll-free at 1-888-936-4266, Monday- .100400). 2. The NAME of the product (PROFORM® RESTORATION 600). 3. The SERIAL NUMBER of the product (see the front cover of this manual). 4. The KEY NUMBER and DESCRIPTION of the - ProForm Restoration 600 | Canadian English Manual - Page 21
REMOVE THIS EXPLODED DRAWING FROM THE MANUAL 81 - ProForm Restoration 600 | Canadian English Manual - Page 22
Bolt Fabric Spa Surround Inflatable Spa Liner Spa Jet Nozzle Spa Cover Heater O-ring Spa Jet Unit Control Mounting Nut Motor Mount Bracket Housing Support Bracket Cable Clamp Filter Cover 3/8" Compression Test Strip Pack Warning Decal User's Manual Video Note: "#" indicates a non-illustrated part - ProForm Restoration 600 | Canadian English Manual - Page 23
EXPLODED DRAWING-Model No. 831.100400 SCHÉMA DÉTAILLÉ-No. du Modéle 831.100400 9 11 4 19 18 38 17 32 35 37 29 46 40 36 27 39 39 6 12 5 5 6 24 14 21 13 50 10 47 10 16 15 48 3 48 49 41 23 22 2 26 20 8 45 7 31 30 42 51 25 44 43 1 33 28 34 R0398A
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
 |
 |
USER'S MANUAL
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or find that there
are missing or damaged parts,
we will guarantee complete satis-
faction through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-888-936-4266
Mon.–Thu., 8:00 am–6:30 pm;
Fri., 8:00 am–6:00 pm EST
Model No. 831.100400
Serial No.
Write the serial number in the space
above for reference.
Patent Pending
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial Number Decal
®
SEARS CANADA, INC., TORONTO, ONTARIO M5B 2B8