ProForm Smart Strider 495 Cse Elliptical English Manual - Page 8
Right Upper Body Leg 6 with an M10 x 50mm
View all ProForm Smart Strider 495 Cse Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Rotate the Right Upper Body Arm (9) to the upright position. 5 Attach the Right Upper Body Arm (9) to the Right Upper Body Leg (6) with an M10 x 50mm Screw (95). IMPORTANT: Tighten the indicated M10 x 45mm Screw (78). Press the Upper Body Arm Cover (20) downward and turn it so that it is flush with the Right Leg Front and Rear Covers (11, 15). Repeat this step on the other side of the elliptical. 6. Attach the Tablet Holder (109) to the Console (4) with four M4 x 16mm Machine Screws (110); 6 start all the Machine Screws, and then tighten them. 7. Plug the Power Adapter (104) into the receptacle on the frame of the elliptical. 7 Note: To plug the Power Adapter (104) into an outlet, see HOW TO PLUG IN THE POWER ADAPTER on page 9. 9 20 78 11, 15 95 6 4 109 110 104 8. Make sure that all parts of the elliptical are properly tightened. Extra parts may be included. Place a mat beneath the elliptical to protect the floor. 8