ProForm Space Saver 700 Instruction Manual - Page 6
Curved Washers 13,M8 Allen Bolt30,M8 Nut
View all ProForm Space Saver 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
STEP 1 Fasten front stabilizer (35) with 2 carriage bolts (36) from the underside of stabilizer. Secure with 2 curved washers (13), 2 cap nuts (40). Fasten Rear stabilizer (101) with 2 allen bolts (100). Remove the Front main frame welding(33),keep the entire main frame horizontally. Using Bolt (95) into the busing ,to keep the main frame assemble tightly. Attention: Before insert the bolt,Pls to adjust the Knob under the bottom tube to keep it in Horizontal In this way make the bolt inserted smoothly 101 100 13 40 35 36 95 STEP 2 Carefully lift the Handlebar Post (26) until it is vertical.Connect the Upper Computer Cable (31) and the Connecting Wire (32). Remove the loosely fitted Allen bolts (15),spring (14) and curved washers (13) from the Main Frame and the Handlebar Post (26) into position. Loosely re-fit the 2x M8 Allen Bolt (15), 2 Spring (14) and 2 Curved Washers (13),M8 Allen Bolt(30),M8 Nut (22) and align the Handlebar Post so it is straight then tighten the Allen bolts fully. 26 31 32 22 14 30 15 13 6