ProForm Sport 5.0 Treadmill English Manual - Page 10

Slide the Left and Right Base Covers onto

Page 10 highlights

4. Hold the Right Upright (90) against the Base (94). Make sure not to pinch the Upright Wire (81). Next, attach a 3/8" x 1 3/4" Screw (62) with a 3/8" Star Washer (13) as shown; do not fully tighten the Screw yet. Then, insert two 3/8" x 2 1/4" Screws (7) with two 3/8" Star Washers (13) and a 3/8" x 1 1/4" Screw (63) with a 3/8" Star Washer into the bracket at the bottom of the Right Upright (90), and partially tighten the three Screws into the Base (94); do not fully tighten the Screws yet. Attach the Left Upright (not shown) in the same way. Note: There are no wires on the left side. 4 94 13 63 5. Identify the Left and Right Base Covers (82, 83). Slide the Left and Right Base Covers onto the 5 Left and Right Uprights (89, 90) as shown. 7 13 81 62 13 90 89 82 90 83 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

10
5.
Identify the Left and Right Base Covers (82, 83).
Slide the Left and Right Base Covers onto the
Left and Right Uprights (89, 90) as shown.
83
90
82
89
5
4
63
62
13
94
13
90
7
13
81
4.
Hold the Right Upright (90) against the Base
(94).
Make sure not to pinch the Upright Wire
(81).
Next, attach a 3/8" x 1 3/4" Screw (62) with a
3/8" Star Washer (13) as shown;
do not fully
tighten the Screw yet.
Then, insert two 3/8" x 2 1/4" Screws (7) with
two 3/8" Star Washers (13) and a 3/8" x 1 1/4"
Screw (63) with a 3/8" Star Washer into the
bracket at the bottom of the Right Upright (90),
and partially tighten the three Screws into the
Base (94);
do not fully tighten the Screws yet.
Attach the Left Upright (not shown) in the
same way.
Note: There are no wires on the left
side.