ProForm T50sr Treadmill English Manual - Page 6
Grounding, Instructions, Starting, Procedure
View all ProForm T50sr Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
GROUNDING INSTRUCTIONS This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in Drawing 1. A temporary adapter that looks like the adapter illustrated in Drawing 2 may be used to connect this plug to a 2-pole receptacle as shown in Drawing 2 if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (Drawing 1) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw. CAUTION: Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified electrician to determine if the outlet box cover is grounded before using an adapter. Grounded Outlet Box Grounding Plug Grounding Pin Grounded Outlet Grounded Outlet Box Adapter Grounding Plug Lug /V Metal Screw Grounding Pin STARTING PROCEDURE Follow the steps below each time you use the treadmill. 1. Stand on the treadmill with your feet on the grip tape on the siderails. 2. Firmly grasp the handrail. 3. Lift the On/Off switch, located on the top of the Console, to the "On" position. 4. Carefully step onto the moving belt and begin walking. 5. Slowly adjust the speed control crank until the desired speed is reached. 6 6. To turn the treadmill off, step onto the grip tape and press down the On/Off switch.