ProForm Trailrunner 4.0 Treadmill English Manual - Page 24
How To Use The Maintenance Mode - best treadmills
View all ProForm Trailrunner 4.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
HOW TO USE THE MAINTENANCE MODE 4. Calibrate the speed of the treadmill. The console features a maintenance mode that allows you to calibrate the incline and speed of the treadmill, restore factory defaults, update the console firmware, calibrate the screen, view technical information, and perform a network test. 1. Select the settings mode. See step 1 on page 22. 2. Select the maintenance mode. Touch the Maintenance button in the lower right corner of the screen to enter the maintenance mode. Calibrate the speed of the treadmill only if instructed to do so by an authorized service representative. Note: The Calibrate Speed button may not be enabled on your treadmill. 5. Restore factory defaults. If necessary, touch the Restore Defaults button to reset the firmware to the original factory firmware. This will erase all firmware updates that you have downloaded. Touch the Begin button to restore the default firmware or the Cancel button to return to the maintenance mode. To avoid damaging the treadmill, do not turn off the power or remove the key while the factory defaults are being restored. The maintenance mode main screen will show information about the model and version of the treadmill. If the console is connected to the controller of the treadmill, the controller dot will be green; if it is not, the dot will flash. If the treadmill is connected to your wireless network, the network dot will be green; if it is not, the dot will be black. 3. Calibrate the incline system of the treadmill. Touch the Calibrate Incline button. Then, touch the Begin button to calibrate the incline system. The treadmill will automatically rise to the maximum incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline system. Press the Cancel button to return to the maintenance mode. When the incline system is calibrated, touch the Finish button. IMPORTANT: Keep pets, feet, and other objects away from the treadmill while the incline system is calibrating. In an emergency, pull the key from the console to stop the incline calibration. When the restoration is complete, the treadmill will turn off and then turn back on. If it does not, press the power switch into the off position. Wait for several seconds, and then press the power switch into the reset position. It may take a few minutes for the console to be ready for use. 6. Update the console firmware. For the best results, regularly check for firmware updates. Touch the Firmware Update button. Next, touch the WiFi button to check for firmware updates using your wireless network. Then, touch the Begin button to check for updates or the Cancel button to return to the maintenance mode. To avoid damaging the treadmill, do not turn off the power or remove the key while the firmware is being updated. 24