ProForm Trainer 8.0 Treadmill English Manual - Page 19

20. Press the two tabs (not shown) on the Tablet Holder (105) into the slots (L) in the console assembly (F). Then, attach the Tablet Holder (105) to the console assembly (F) with four #8" x 5/8" Machine Screws (26). Tip: Start the two upper Machine Screws first, and then start the two lower Machine Screws. Do not overtighten the Machine Screws. IMPORTANT: The Tablet Holder (105) is designed for use with most full-size tablets. Do not place any other electronic device or object in the Tablet Holder. 20 Start First 26 105 26 LF 21. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see page 31). Note: Extra parts may be included. 19