ProForm Trainer 8.0 Instruction Manual - Page 9
Slide the Left and Right Base Covers onto
View all ProForm Trainer 8.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4. Hold the Right Upright (90) against the Base (94). Make sure not to pinch the Upright Wire 4 (81). Attach the Right Upright (90) and a Wheel (97) with two 3/8" x 2 3/8" Screws (7), a 3/8" x 1 1/4" Screw (63), a 3/8" x 1 3/4" Screw (62), and four 3/8" Star Washers (13) as shown; do not fully 7 tighten the Screws yet. Attach the Left Upright (not shown) in the 13 same way. Note: There are no wires on the left side. 94 13 63 90 5. Remove and save the four 5/16" x 3/4" Screws (31). 5 Identify the Left and Right Base Covers (82, 83). 89 Slide the Left and Right Base Covers onto the Left and Right Uprights (89, 90) as shown. 31 81 62 13 97 90 82 31 83 9
9
4.
Hold the Right Upright (90) against the Base
(94).
Make sure not to pinch the Upright Wire
(81).
Attach the Right Upright (90) and a Wheel (97)
with two 3/8" x 2 3/8" Screws (7), a 3/8" x 1 1/4"
Screw (63), a 3/8" x 1 3/4" Screw (62), and four
3/8" Star Washers (13) as shown;
do not fully
tighten the Screws yet.
Attach the Left Upright (not shown) in the
same way.
Note: There are no wires on the left
side.
4
63
62
97
94
13
90
7
13
81
5.
Remove and save the four 5/16" x 3/4"
Screws (31).
Identify the Left and Right Base Covers (82, 83).
Slide the Left and Right Base Covers onto the
Left and Right Uprights (89, 90) as shown.
83
90
31
82
89
31
5
13