ProForm Xp 420 Razor Elliptical English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included hex keys and your own Phillips screwdriver wrench , and rubber mallet . , adjustable As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. If a part is missing, call 1-888-533-1333. M6 Locknut (77)-4 Wave Washer M10 Split M10 x 20mm Button (88)-2 Washer (78)-10 Screw (79)-4 M10 x 41mm Shoulder Screw (63)-2 M4 x 16mm M4 x 16mm Screw (84)-12 Flat Head Screw (94)-4 M4 x 32mm Screw M6 x 16mm Button (95)-2 Screw (80)-6 M6 x 38mm Button Bolt (76)-4 M10 x 70mm Button Screw (75)-6 5