ProForm Xp Whirlwind 280 Bike Canadian English Manual - Page 8
console displays or other electronic compo
View all ProForm Xp Whirlwind 280 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
7. The Console (3) requires four D batteries (not included); alkaline batteries are recommended. 7 IMPORTANT: If the Console has been Batteries exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic compo- nents. Remove the battery cover and insert the batteries into the battery compartment. Make sure to orient the batteries as shown by the diagram inside the battery compartment. Then, reattach the battery cover. Battery Cover 3 8. While another person holds the Console (3) near the Upright (2), connect the console wire 8 to the Extension Wire (39). Then, connect the console ground wire to the Ground Wire (80) Insert the excess wire into the Upright (2) or into the Console (3). Tip: Avoid pinching the wires. Attach the Console (3) to the Upright (2) with four M4 x 16mm Screws (77). 3 Ground Wire 80 2 77 Console Wire 39 Avoid pinching the wires 8