Pyle PHLOR44BK Instruction Manual - Page 3

A Nozzle B Nozzle Release Button C ON/OFF Button D Mode Button E Mode Indicator F Water Tank G Charging Base Cover H Charging Base I Water Tank Cup Note: There may be some liquid remaining inside the main appliance before use (tank, water suction tube, etc), this is the remaining distilled water that was used for the performance (water flow) test, so there are no health concerns. How to use Charging the device 1. Take the charger base cover down and insert the appliance plug securely into the appliance socket (make sure no liquid remaining inside the socket before insert the appliance plug). 2. Insert the charging adaptor securely into the power outlet. 3. The "ch" indicator blinks when the device is charging, and it will be steadily on after device is full charged. 4. Recover the cover onto charger base again after charging finished Note: If the "CH" indicator is blinking during or after an irrigating, that means the battery need to be recharged. An full recharging will take about 8 hours. (Fig.1)