Pyle PLD10BT PLD10BT Manual 1 - Page 36
Pyle PLD10BT Manual
View all Pyle PLD10BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Troubleshooting Please read the user manual carefully before using the car A/V system. If you have any difficulty using this car A/V system, refer to the troubleshooting guide. If you are still unable to resolve the problem after using all the suggestions, please contact your dealer or an authorised service centre . NO PICTURE, SOUND * Ensure that the power switch is on. * Ensure that the power cord is not damaged or the fuse is not blown. NO SOUND BUT HAVE PICTURE * Ensure that the player's audio output is properly connected to the speaker's audio input. * Check whether the audio connector is damaged. * Check whether you have turned down the volume. * Ensure that the audio is not in MUTE mode. BLACK AND WHITE PICTURE OR SCREEN ROLLING * Ensure that you have set right mode of video system (e.g. PAL, NTSC). FLAWS OF PICTURE OR SOUND * Check whether disc is scratched or stained. * Check whether AV connector and output terminal is stained. * Check whether there is condensation inside the lens. If so, power on the player and do not work for an hour or so, then try again. DISPLAYS: NO DISC OR BAD DISC * Ensure that you have inserted a disc into the disc slot. * Check whether disc is inserted with label side upwards. * Check whether disc is bent. * Check whether disc is stained or scratched badly. * Ensure that disc format is compatible to the player. * Ensure that temperature inside the car is not too high. If so, cool off until the ambient temperature returns to normal. * Insert another disc into the disc slot. REMOTE CONTROL IS INSENSITIVE OR DOES NOT WORK * Check whether the lithium cell of the remote control is powerful and working properly. * Direct the IR emitting window of the remote control to the IR sensor of main unit. * Check whether there are some obstacles between remote control and main unit. SOME FUNCTION BUTTONS DO NOT WORK * Turn off ACC power, then turn on again. * Reset unit to zero, then turn on again. * Remove control panel from chassis, reattach it onto the chassis and then turn it on again. RADIO DOES NOT WORK * Check whether antenna cable is connected firmly. * Manually tune for a station. -34-