Pyle PLMR91UB User Manual - Page 9
Bluetooth Operation
View all Pyle PLMR91UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
OPERATION AUTOMATIC MEMORY STORING Press BND button (11) for 2 seconds, the radio searches from the 87.5MHz frequency and checks the signal strength until one cycle search is finished. And then some stations are stored into the corresponding preset number button. In the first cycle it will in LOCAL mode to receive the stronger station. If it is less than 18 pcs station it will searching stations in 2nd cycle in DX (distance) mode. USB PLAY OPERATION On the back side of the unit, there is a USB interface . You can connect an USB driver through this interface . When you connect an USB driver through the interface, the unit will search the MP3 /WMA files in the USB driver and start to play automatically. If in other mode, you can also press MODE button to select USB mode. It supports the MP3/WMA file in the device. seconds later the 2nd "*" flash. You can press VOL+ 2 times. It shows "NUM 32* " . Then press button (5) to confirm. It will start to play the 32'th song. But if you don't press button (5) to confirm. It will not play the song you selected. FOLDER+/- FUNCTION When MP3/WMA playing. Press and hold BND button it will back to the previous folder. Press and hold MOD button it will to the next folder. CAUTION: When there are important files in the USB Device, do not connect it to the main unit to play, because any wrong operation may cause files loss. And our company assumes no responsibility for this. BLUETOOTH OPERATION PRE-PAIR FOR BLUETOOTH OPERATION SELECTING SONGS IN SINGLE STEP Press button (4) or button (2) to move to the following song or the previous song. File number shows on display. Press and hold button (4) or button (2) for 2 seconds to fast forward or fast reverse. Song playing starts from when you release the button. PAUSING PLAYING Press button (5) to pause playing. Press it again to resume playing. SELECTING SONGS BY BND BUTTON In USB mode. Press BND button (11) to active the file search mode. It will show "NUM *** ". In this moment press VOL+ or VOL- knob to select the song number's 1'st number. 3 seconds later to select the 2'nd number... (Such as when you want to select the 32'th song. In "NUM *** " you press VOL+ 3 times. It shows "NUM 3** " And 3 (i) When use Bluetooth, please make sure the mobile phone supports Bluetooth function. (ii) For the different kind of mobile phone, Bluetooth emissive power has some difference. To get the best conversation quality, it is commended that the distance between the mobile phone and the unit is within 3m. And please don't put any metal object or any obstacle between the path of the mobile phone and the unit. PAIRING 1) On the mobile phone, select the Bluetooth set up. (Please refer to the instruction manual of your mobile phone on how to operate Bluetooth.) 2) "CAR KIT" should appear in the list 8