Pyle PRJ3D89 PRJ3D89 Manual 1 - Page 8

and move to the next higher or lower item in the menu. - -Press these buttons to increase or decrease the sound volume level and directly choose the item in the menu. --/--˖ -Select the channel rapidly. -Call: -Press this button to view the current signal input and current channel number.  &KDSWHU%DVLF2SHUDWLRQ  6HFWLRQ7XUQLQJRQWKH3URMHFWRU 1. Make sure that power of the projector and all equipment connecting with the projector is not on. 2. Connect a video source to the projector. 3. Remove the lens cover. 4. Connect the projector to an electrical outlet using the supplied power cable. 5. Turn on hard power switch located on the back of the projector. 6. When the projector is turned on, the indicator light rurns red to orange Press the POWER button on the projector of the STANDBY/ON button on the remote control, The indicator light will turn green indicating that the projector is working normally.(If no sources have been connected to the projector the indicator light will stay red.) 1RWLFH If there is no image displayed, check all connections and input setting. 7