RCA 26LB30RQD User Manual - Page 10
TV Stand Installation
View all RCA 26LB30RQD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
TV Stand Installation TV 26LB30RQD/32LB30RQD are packaged with the TV stand separated from the cabinet. To setup the TV table stand, please carry out the installation according to the instructions below. Step One Place the TV faced down on a soft cloth or cushion to prevent the LCD panel from being damaged. The LCD panel can be scratched easily, so please: 1. Choose an absolutely flat surface to place the TV on. 2. Use soft cloth or cushion to face the TV panel. Do not put TV on the table directly. Always unplug the AC cord first when installing/removing the stand. Step Two Insert the neck into the opening on the bottom of the TV, and then insert the 4 screws into the 4 holes on the neck and tighten them. Pedestal Screws Quantity Part # M4 x 10mm 4pcs RS01TB410H Step Three Take the base. Please align four holes of the base and four screwholes of the neck, insert the base to the neck, and then insert the 4 screws and tighten them. Pedestal Screws Quantity Part # M4 x 10mm 4pcs RS01TB410H 9