RCA ANT700F User Guide - Page 8
Connect the coaxial cable to the antenna.
 |
View all RCA ANT700F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
The antenna can be mounted either vertically or horizontally. To mount it horizontally, simply rotate the arm clockwise 90O. Try different positions for best performance. 90° To adjust the antenna's position: 1. Loosen the bolt on either end of the arm. 2. Move the arm or antenna to the desired position. 3. Re-tighten the bolt so that the antenna and arm stay firmly in position. 6. Connect the coaxial cable to the antenna. Connect the coaxial cable to the F-connector of the antenna as shown here. Then cover the connector with the attached weather boot. Note: If you're using your own coaxial cable (i.e., not the one provided with this antenna), make sure to affix it to the outside of the mounting base. 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10
 |
 |
8
The antenna can be mounted either vertically or horizontally. To
mount it horizontally, simply rotate the arm clockwise 90
O
. Try different
positions for best performance.
90°
To adjust the antenna’s position:
1.
Loosen the bolt on either end of the arm.
2.
Move the arm or antenna to the desired position.
3.
Re-tighten the bolt so that the antenna and arm stay firmly in
position.
6.
Connect the coaxial cable to the antenna.
Connect the coaxial cable to the F-connector of the antenna as shown
here. Then cover the connector with the attached weather boot.
Note:
If you’re using your own coaxial cable (i.e., not the one provided
with this antenna), make sure to affix it to the outside of the mounting
base.