RCA H5401RE1 User Guide

RCA H5401RE1 - ViSYS Cordless Extension Handset Manual

RCA H5401RE1 manual content summary:

  • RCA H5401RE1 | User Guide - Page 1
    DECT 6.0 Cordless Handset with Caller ID User's Guide This accessory handset is only for use with Model 25423, 25424, or 25425 base units. Please read this manual before operating this product for the first time. Model H5401
  • RCA H5401RE1 | User Guide - Page 2
    instructions for details. Notes • This equipment may not be used on coin service provided by the telephone company. • Party lines trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service
  • RCA H5401RE1 | User Guide - Page 3
    , to allow you to maintain uninterrupted service. Interference Information This device complies with uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions Identify and Resolve Radio/TV Interference Problems." This booklet is available from the
  • RCA H5401RE1 | User Guide - Page 4
    clip supplied with this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This telephone is compliant with the DECT 6.0 standard which operates in the 1.92GHz to 1.93GHz frequency range. WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE
  • RCA H5401RE1 | User Guide - Page 5
    Installation Information 8 Important Installation Guidelines 9 Installing the Handset Battery 9 Connections and Setup 9 Connecting the AC (Electrical) Power.... 10 Connecting the RF Module 10 Handset Layout 11 Handset Charge Cradle 11 Telephone Setup 12 Language 12 Ring Melody 12 Ring
  • RCA H5401RE1 | User Guide - Page 6
    26 Connecting the Belt Clip 26 Display Messages 26 Troubleshooting Guide 27 Telephone Solutions 27 Caller ID Solutions 28 Battery Solutions 28 General Product Care 28 Causes of Poor Reception 29 Warranty 29 Warranty Assistance 29 Limited Warranty 30 Accessory Information 31 Index 32 
  • RCA H5401RE1 | User Guide - Page 7
    RCA telephone. This system operates in the DECT 6.0 frequency range. This accessory handset will expand the phone systems for Models 25423/25424/25425 to cordless when the RF module (packed with this cordless handset) is plugged into the back of the base unit. Features: • Call Waiting and Caller ID
  • RCA H5401RE1 | User Guide - Page 8
    Connections and Setup Before Your Begin Parts Checklist Make sure your package includes the items shown here. AC power adaptor Cordless handset charger Cordless handset Belt clip Cordless RF module Handset battery Digital Security System Your cordless phone uses a digital security system to
  • RCA H5401RE1 | User Guide - Page 9
    manual for these devices on how to properly set channels to avoid interference. Installing the Handset Battery NOTE: You must connect the handset battery before use. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Nickel-metal Hydride (Ni-MH) battery model
  • RCA H5401RE1 | User Guide - Page 10
    the phone, battery performance is compromised. CAUTION: To reduce risk of personal injury, fire, or damage use only the 5-2776 power adaptor listed in the user's guide. This power adaptor is intended to be correctly orientated in a vertical or floor mount position. Connecting the RF Module Insert
  • RCA H5401RE1 | User Guide - Page 11
    ) Privacy (button) Talk (button) DIR (button) Int/Transfer (button) Conf/Store (button) Handset Charge Cradle Connections and Setup Visual Ring Indicator Select/Save (button) Headset Jack Format/Redial (button) Line (button) End (button) CID (button)--Only applicable for 25424/25 VOL 6 (volume down
  • RCA H5401RE1 | User Guide - Page 12
    Connections and Setup Telephone Setup This handset has several programmable functions. NOTE: Use the Select/Save button to go into the sub-menu, and use the Exit button to go to the previous menu. Language 1. Press the Menu button once, LANGUAGE will show in the display. 2. Press the Select/Save
  • RCA H5401RE1 | User Guide - Page 13
    or 5) buttons until PHONE SETTING is displayed. 2. Press Select/Save button to select. 3. Use the VOL ( 6 or 5) buttons of the sub-menu until AUTO TALK is displayed. 4. Press Select/Save button to select. 5. Use the VOL ( 6 or 5) buttons to select ON or OFF. Select ON to let the handset pick up the
  • RCA H5401RE1 | User Guide - Page 14
    is displayed. 2. Press Select/Save button to select. 3. Use the VOL ( 6 or 5) buttons to select YES. 4. Press Select/Save button to reset to the default settings. Set Time The time cannot be set manually in the handset, only at the base. Any update to the base time will be automatically sent to the
  • RCA H5401RE1 | User Guide - Page 15
    base is paging the cordless handset. Answering a Call 1. Press the Talk button on the handset. (The base displays CORDLESS H/S IN USE). 2. When finished, press the End button or replace the handset in the charge cradle to hang up. Making a Call 1. Press the Talk button to access an available line
  • RCA H5401RE1 | User Guide - Page 16
    using any combination of 2 lines (or a line and an intercom call). To connect and conference: 1. To make a call, select the line line number) for the person you want to continue speaking with, and the other party will automatically disconnected. To disconnect both parties: Hang up the handset
  • RCA H5401RE1 | User Guide - Page 17
    the system. Flash Use the Flash/Exit button on the handset to activate custom calling services such as call waiting or call transfer, which are available through your local phone company. Call Timer After you press Talk or Line plus number button to select the line on the cordless handset, the built
  • RCA H5401RE1 | User Guide - Page 18
    . Press the Page button once on the base, then press number 0 button. The cordless handset will beep continuously (if it is not out of range) for 2 minutes or until you press any button on the handset. NOTE: You may still page the cordless handset even if the ringer is turned off. Intercom Operation
  • RCA H5401RE1 | User Guide - Page 19
    to input the phone ID you want to intercom with. For example, to intercom with extension 2, you need to input "0", "2". 4. When finished, press the Int/Transfer or End button to end the intercom call. NOTE: To cancel the intercom call, press INTERCOM. Memory The cordless handset and base each have
  • RCA H5401RE1 | User Guide - Page 20
    the Select/Save button again to save your selection. Storing a Redial Number 1. Make sure the phone is OFF (not in TALK mode). 2. Press the Format/Redial button on the handset to review the redial number. 3. Use the VOL ( 6 or 5) to scroll to the desired number. 4. Press the Conf/Store button and
  • RCA H5401RE1 | User Guide - Page 21
    select your preferred line. The telephone number dials automatically. Caller ID (CID) NOTE: This feature does not function when using the handset with base model 25423, as it does not support Caller ID. Caller ID (CID) is a service available from your local telephone company. For Caller ID to work
  • RCA H5401RE1 | User Guide - Page 22
    The telephone number of the caller. • The name of the caller, if available in your service area. • The Line Number on which the call was received. • Time and date the call was received. • NEW appears for all calls that have not been reviewed. NOTE: Check with your local phone company regarding name
  • RCA H5401RE1 | User Guide - Page 23
    If the CID shows NO NAME, then please enter the name for this record. Dialing a Caller ID Number When reviewing any call record in the Caller ID memory, you can dial back the caller's number. 1. Make sure the phone is OFF (not in talk mode). 2. Press CID/4button once, then VOL ( 6 or 5) button
  • RCA H5401RE1 | User Guide - Page 24
    to the first call. IMPORTANT: In order to use all of the features of this unit, you must subscribe to either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service. To know who is calling while you are on the phone, you must subscribe to Call Waiting Caller ID Service. 24
  • RCA H5401RE1 | User Guide - Page 25
    fire or personal injury, use only the Thomson Inc. approved Nickel-metal Hydride (Ni-MH) battery model 5-2734, that is compatible with this unit. 1. Make sure handset is OFF (not in TALK mode) before you replace battery. 2. Remove the battery compartment door. 3. Disconnect the battery plug from the
  • RCA H5401RE1 | User Guide - Page 26
    by another extension. SEARCHING..: Handset is out of range of the base. INCOMPLETE DATA: Caller information has been interrupted during transmission or the phone line is excessively noisy. BASE IN USE: The Base unit is in use, handset is blocked. SELECT PHONE ID: Key in the
  • RCA H5401RE1 | User Guide - Page 27
    the telephone line cord is connected to the base and the wall jack . • Connect another phone to the same jack; if there is still no dial tone, the problem might be your wiring or local service. • The cordless handset may be out of range of the base. Move closer to the base. • Ensure the battery is
  • RCA H5401RE1 | User Guide - Page 28
    standard name/number Caller ID service from your local telephone company. Battery Solutions If you experience any of the following problems, even after fully recharging the battery, you may need to replace the battery pack: • Short talk time • Poor sound quality • Limited range General Product Care
  • RCA H5401RE1 | User Guide - Page 29
    with other electronic devices. • Baby monitor is using the same frequency. • Handset battery is low. • You're out of range of the base. Warranty Assistance If trouble is experienced with this equipment, for warranty information, please contact customer service at 1-800-448-0329. If the equipment is
  • RCA H5401RE1 | User Guide - Page 30
    does not cover: • Customer instruction. (Your Owner's Manual provides information regarding operating instructions and user controls. Any additional information, should be obtained from your dealer.) • Installation and setup service adjustments. • Batteries. • Damage from misuse or neglect
  • RCA H5401RE1 | User Guide - Page 31
    . Thomson Inc. shall not be liable for incidental or consequential damages resulting from the use of not apply to you. •This warranty gives you specific legal rights, and you also may have other rights AC power adaptor 5-2776 Belt clip 5-2774 Handset battery 5-2734 To place order, have your Visa,
  • RCA H5401RE1 | User Guide - Page 32
    ID Errors 24 Caller ID Solutions 28 Causes of Poor Reception 29 Changing the Battery 25 CHARGE Indicator on the Cradle 15 Clear All Memory 14 Conference Call 16 Connecting the AC (Electrical) Power 10 Connecting the Belt Clip 26 Connecting the RF Module 10 Connections and Setup
  • RCA H5401RE1 | User Guide - Page 33
    of Range 17 P Paging All Extension from the Cordless Handset 18 Paging the Cordless Handset 18 Parts Checklist 8 Privacy 17 R Receiving an Incoming Telephone Call During an Intercom Call 18 Receiving and Storing CID Records 22 Redial 15 Regional Code 14 Reviewing Call Records
  • RCA H5401RE1 | User Guide - Page 34
    web site at www.rca.com Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. Model H5401 00020197 (Rev. 1 E/S) 07-39 Printed in China Thomson Inc. 101 W. 103rd Street Indianapolis, IN 46290-1102
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

DECT 6.0
Cordless Handset with
Caller ID
User’s Guide
This accessory handset is only for use
with Model 25423, 25424, or 25425
base units.
Please read this manual
before operating this
product for the first time.
Model H5401