RCA H5401RE1 User Guide - Page 20

Memory 4. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letter T; press the 4 key twice for the letter H. 5. Press the Select/Save button again to save your selection. Storing a Redial Number 1. Make sure the phone is OFF (not in TALK mode). 2. Press the Format/Redial button on the handset to review the redial number. 3. Use the VOL ( 6 or 5) to scroll to the desired number. 4. Press the Conf/Store button and ENTER NAME is displayed. 5. Use keypad to enter the name. 6. Press Select/Save button to save the record. Inserting a Pause in the Dialing Sequence Press the #Pause button on the touch-tone pad twice to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or wait for a computer access tone.) Each pause counts as 1 digit in the dialing sequence. The letter "P" in the displayed number indicates a pause. Reviewing, Changing or Deleting Stored Names/Numbers To Review: Press DIR/3on the handset, then press the VOL ( 6 or 5) button to scroll through the stored numbers. To Change: While viewing the record, press the Select/Save button. Follow Step 2 to 5 under Storing a Name and Number in Memory. To Delete: Press DIR/3on the handset, then press the VOL ( 6 or 5) button to scroll to a desired memory. 1. Press the Delete/Mute button. DELETE? is displayed. 2. Press Delete/Mute again to confirm. 20