RCA HD61THW263 User Manual - Page 80
Remove the new lamp assembly unit from its packaging. Make sure you
View all RCA HD61THW263 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
References 8. Press the catch tabs near the screw you just loosened (one tab is above the screw and one is below), and remove the entire lamp access door. Place the door to the side (don't put it on the floor or anywhere someone might step on it or accidentally break the tabs). BAR CODE AREA CAUTION ! - HOT PRECAUCIÓN - CALIENTE ATTENTION - CHAUDE LAMP PART # - 265109 9. Loosen the screw on the lamp unit inside the TV (the screw stays with the unit so just loosen it, don't remove it). Service Model Number Sticker with Lamp Part Number 41030325110090 10. As you remove the lamp, pay attention to how the lamp fits so that you can use the proper orientation when you're installing the new lamp. To remove the lamp unit: • grasp the handle and pull straight back to remove the entire lamp assembly unit from the TV. • place the old unit out of the way where it won't get broken or dropped. 11. Remove the new lamp assembly unit from its packaging. Make sure you do not touch the glass surface of the lamp. 12. Make sure the lamp unit is oriented in the correct position, and gently slide it into the lamp access opening as far as it can go (it fits snugly). 13. Tighten the screw on the new lamp unit. 14. Put the old lamp unit into the box in which the new lamp unit was packaged. 78 Chapter 5