RCA L46FHD37R User Guide & Warranty - Page 7

Removing the Table Stand Your TV comes with the table stand attached. If you want to mount your TV to the wall, remove the table stand by following the instructions below. Step 1 Place the plastic bag off the TV and place it on a table or other flat surface. Place the TV set face down on the TV bag. Step 2 Remove the table stand from the TV cabinet. Use a screwdriver to remove the three M6 ST-screws.(Note: For model L46FHD37R, there are four M5 ST-screws. ) Step 3 (Only for model L42FHD37R/L46FHD37R) Attach the stand cap to the TV cabinet. 1 Step 3 (Only for model L40FHD41) Attach the stand cap to the TV cabinet using a M4 ST-screw and a screwdriver. TV cabinet with stand cap attached. TV cabinet with stand cap attached. Mounting Your TV to the Wall To mount your TV to the wall, purchase a VESA wall Caution: Your wall Models L40FHD41/L42FHD37R/L46FHD37R Purchase a VESA 600 x400, Size M6 screw mount must be able to bear a minimum of five times the TV's net The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 600x400 weight to avoid causing refers to fact that the mounting measurements are 600mm horizontally and 400mm vertically. damage. Follow the directions included with the wall mount to mount the TV to the wall. Connections and Setup Chapter 1 7