RCA RCRPS06GR Owner/User Manual - Page 17
Volume Punch-Through - tv codes
View all RCA RCRPS06GR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ENGLISH To enable Master Power again: 1. Press and hold the P key for 3 seconds. The POWER key comes on. 2. Press VOL+ to enable Master Power again. 3. Press the P key to confirm. The Master Power function is enabled again. Reassigning the DVR•AUX1 or VCR•AUX2 Key The DVR•AUX1 key defaults to control a DVR, and the VCR•AUX2 key defaults to control a VCR. If you want the DVR•AUX1 or VCR•AUX2 key to control a different device (an additional TV, DVD, satellite or cable box, for example), you must reassign it. 1. Press and hold the DVR•AUX1 or VCR•AUX2 key. The POWER key turns on. 2. While holding down the DVR•AUX1 or VCR•AUX2 key, press and release the number key on the keypad for the device you wish to control (see the chart below). The POWER key turns off. DVR•AUX1 OR VCR•AUX2 KEY CONTROLS: Additional TV press 1 VCR or DVR press 2 Additional DVD press 3 Additional audio device press 4 Additional satellite receiver, cable box, press 5 or DTV converter 3. Release the DVR•AUX1 or VCR•AUX2 key. The POWER key blinks four times and then turns off. The DVR•AUX1 or VCR•AUX2 key is now set to control the device type you selected. 4. Follow the directions in the auto, brand, direct entry, or manual code search to program the DVR•AUX1 or VCR•AUX2 key. Volume Punch-Through Volume Punch-Through allows the VOL and MUTE keys, when pressed in SAT•CBL•STREAM, DVD, DVR•AUX1, or VCR•AUX2 modes, to "punch through" to either TV or AUDIO, whichever was accessed last. Volume Punch-Through occurs automatically and allows you to control the volume without exiting the current mode. (If the DVR•AUX1 or VCR•AUX2 key has been programmed with a TV or AUDIO code, volume can punch through to this device as well.) Note: Volume Punch-Through does not occur in cases where the component code has its own volume/mute controls, such as some satellite receivers. 17