RCA RCU403 Owner/User Manual: RCU403 - Page 9

RCU403_US_IB_REVC 7/16/03 15:21 Page 9 (BLINK) ON•OFF ENTER 4. Aim the remote at the component and press the ON•OFF key once. The remote automatically sends every code for the specified component one at a time, with a 3 second delay between each code. Keep the remote aimed at the component throughout the process. 5. As soon as the component turns off, you must press the ENTER key immediately so the remote stores the correct code. If you don't press ENTER within 3 seconds, the remote will send the next code in the list, and you will have to start over from step 2. 6. Use Code Retrieval to identify the code for your component for future reference. Code Retrieval If you used one of the Code Search methods to program your remote, follow the steps below to find out which code is compatible with your component. Finding the actual code and writing it down will save you time if you ever need to program the remote again (e.g., if programming is lost when you change the batteries). CODE INDICATOR 1. Press and hold the CODE SEARCH SEARCH LIGHT key until the indicator light illuminates. Then release the CODE SEARCH key. 2. Press and release the component DBS• VCR• TV CABLE DVD key that matches the component's code you are retrieving (TV, VCR•DVD, or DBS•CABLE). The indicator light blinks once and then remains lit. (BLINK) 3. Press and release the CODE SEARCH key. The indicator light turns off. CODE SEARCH (OFF) 123 456 789 0 (BLINK) 4. Starting with 0 on the keypad, press the number keys in order (0-9) until the indicator light blinks. 5. The number that causes the indicator light to blink is the first digit of your code. 6. Repeat step 4 until you have retrieved all three numbers of the code. 7. Refer to the code box to write down the code for your component within the Direct Entry Section (pages 5-7) for the component just programmed. 9