RCA RP3755 User Guide - Page 4

THE DIGITAL CD CLOCK RADIO Adjusting snooze duration The snooze-alarm control allows extra sleep time after the unit comes on in alarm mode. Press SNOOZE will turn off the alarm until the snooze period is over. You can use the SNOOZE feature repeatedly for up to about 2 hours, after which the unit will turn off until the next alarm conditions are met. STEREO CD PLAYER / DIGITAL RADIO REV ( SKIP) FWD REPEAT TUNE WAKE UP CD TRACK STOP OFF MEMO RECALL SET SNOOZE VOLUME RADIO ON BAND 1 Press and hold SNOOZE SNOOZE 2 > or FWD FWD on the top of the unit to set the "quiet" period (default is 9 minutes) from 1 minute to 30 minutes for which the alarm momentarily goes off. Stopping alarm 1. To silence the alarm momentarily: 1• Press SNOOZE SNOOZE and the alarm will sound again when the snooze period is over (see "Adjusting snooze duration" above) 2. To stop alarm from sounding: OFF •2 Press OFF and the alarm will be on again the following day at the same time 33. To cancel alarm completely: CANCEL WAKE 1 WAKE 2 4• Press CANCEL then WAKE 1 or WAKE 2 and the corresponding alarm(s) won't sound again the following day. WAKE indicators will not be displayed. 5 • If you press WAKE 1 or WAKE 2 button again, the previous preset time remains unchanged. • If uninterrupted, the alarms will stop sounding in 2 hours. 5 RP3755 EN-US rev.2 8-9 THE DIGITAL CD CLOCK RADIO Setting COUNTDOWN Timer EN NAP TIMER COUNTDOWN 1 Select COUNTDOWN timer at the back of the unit . TIMER 2 Press TIMER and the TIMER indicator will appear on the display. > 3 Press REV REV or FWD FWD to set countdown time. TIMER 4 Press TIMER to activate countdown. TIMER indicator lights continuously. The display will show the countdown time as it counts down towards 0:00 (minute:second). Alarm will sound once the timer reaches 0:00. 5 TIMER Press TIMER again to cancel countdown timer. Setting NAP Duration You may take a short nap and be woken up by the alarm. NAP TIMER COUNTDOWN 1 Click the Timer selector at the back of the unit to NAP TIMER 2 Press TIMER . The TIMER indicator and 0:20 (as default setting) will appear on the display. (i.e. alarm will be turned on in 20 minutes). Display will switch back to real clock time after about 3 seconds. > 3 Press REV REV or FWD FWD to set nap time. Nap time decrease or increase at 10 -minute intervals between 10 and 120 minutes. TIMER 4 Press TIMER to activate countdown. The display returns to the real clock time. TIMER indicator lights continuously. Alarm will sound once the timer reaches 0:00. TIMER 5 Press and hold TIMER until the TIMER indicator disappears to cancel NAP timer. TIP: To check the remain NAP timer, press TIMER. The display will show the minutes left. After 3 seconds, the display will return to clock time. 6 6/21/01, 2:41 PM