RCA RP5013 User Guide - Page 15

Troubleshooting tips Unit doesn't turn on Cannot activate the unit after EN • Check that batteries are properly pressing ON keys inserted and not exhausted. • There may be software problem. • Make sure battery compartment door Remove batteries and wait for 30 is properly closed. seconds to reset the unit, then re- • Make sure the LOCK function is not install batteries and try again. activated. Recordable time becomes shorter Display keeps flashing when unit is • You have set the recording off quality to 'High Quality', refer to • You have not set the time. Refer section 'Setting Recording Quality'. to section on Time Setting. Cannot perform playback Cannot record • Make sure you have selected folder • Make sure the LOCK function is not with recorded messages. activated. • Make sure the LOCK function is not • Make sure the memory is not full. activated. • Check the total files in all folders not exceeding 198. Cannot erase recorded file(s) • You have recorded 99 files in one • Make sure you follow each step folder. Try record in a new folder. under section "Erasing Selected File" carefully. Cannot show recording date and time during playback • You have not set the date and time before recording. Refer to the section on 'Time Setting'. No sound from the speaker during playback • Make sure the volume level is not set to 0. • Headphones is connected. 13