RCA RS2664 User Manual - RS2664 - Page 1

Tocom: 5645 6830 MULTI FUNCTION DISPLAY user manual manual de usuario RS2664 FCC information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. In accordance with FCC requirements, changes or modifications not expressly approved by Thomson Inc. could void the user's authority to operate this product. This device generates and uses radio frequency (RF) energy, and if not installed and used properly, this equipment may cause interference to radio and television reception. If this equipment does cause interference to radio or television reception (which you can determine by turning the equipment off and on), try to correct the interference by one or more of the following measures: • Reorient the receiving antenna (that is, the antenna for the radio or television that is "receiving" the interference). • Move the unit away from the equipment that is receiving interference. • Plug the unit into a different wall outlet so that the unit and the equipment receiving interference are on different branch circuits. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, "How To Identify and Resolve Radio TV Interference Problems." This booklet is available from the U.S. Government Printing Office, Washington, DC 20402. Please specify stock number 004-00000345-4 when ordering copies. This product complies with DHHS Rules 21 CFR Subchapter J. Applicable at the date of manufacture. For your safety The AC power plug is polarized (one blade is wider than the other) and only fits into AC power outlets one way. If the plug won't go into the outlet completely, turn the plug over and try to insert it the other way. If it still won't fit, contact a qualified electrician to change the outlet, or use a different one. Do not attempt to bypass this safety feature. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN T H E L I G H T N I N G CAUTION: TO REDUCE THE THE EXCLAMATION FLASH AND ARROW- RISK OF ELECTRIC SHOCK, POINT WITHIN THE HEAD WITHIN THE DO NOT REMOVE COVER T R I A N G L E I S A T R I A N G L E I S A ( O R B A C K ) . N O U S E R - WARNING SIGN WA R N I N G S I G N SERVICEABLE PARTS IN- ALERTING YOU OF ALERTING YOU OF SIDE. REFER SERVICING I M P O R T A N T " D A N G E R O U S TO QUALIFIED SERVICE I N S T R U C T I O N S VOLTAGE" INSIDE PERSONNEL. A C C O M PA N Y I N G THE PRODUCT. T H E P R O D U C T. SEE MARKING ON BOTTOM / BACK OF PRODUCT WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. This audio system has earned the ENERGY STAR. EN/E It is important to read this instruction prior to using your new product for the first time. Es importante leer este manual antes de usar por vez primera su euipo. PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE IMPORTANT SAFETY INSTRUCTIONS Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • ADDITIONAL SAFETY INFORMATION • Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. • Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings. • Do not place lighted candles, cigarettes, cigars, etc. on the product. • Connect power cord only to AC power source as marked on the product. • Care should be taken so that objects do not fall into the product. • Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components. • IF YOUR PRODUCT OPERATES ON BATTERIES, adhere to the following precautions: A. Any battery may leak electrolyte if mixed with a different battery type, if inserted\ incorrectly, or if all batteries are not replaced at the same time. B. Any battery may leak electrolyte or explode if disposed of in fire or an attempt is made to charge a battery not intended to be recharged. C. Discard leaky batteries immediately. Leaking batteries can cause skin burns or other personal injury. When discarding batteries, be sure to dispose of them in the proper manner, according to your state/ provincial and local regulations. Important information English Technical information Product: Audio System Brand: RCA Model: RS2664 Electrical consumption Power Supply: 120V ~ 60Hz Power Consumption: 240 Watts For your records In the event that service should be required, you may need the model number. In the space below, record the date and place of purchase: Model No. Date of Purchase Place of Purchase Service information This product should be serviced only by those specially trained in appropriate servicing techniques. For instructions on how to obtain service, refer to the warranty included in this Guide. Safety precautions • Never open the cabinet under any circumstances. Any repairs or internal adjustments should be made only by a trained technician. • Never operate this product with the cabinet removed. • Do not use your System immediately after transporting it from a cold place to a warm place, as condensation may cause the system to malfunction. • Keep your unit away from humid areas and abnormally hot places. • Do not touch the player with wet hands. If any liquid enters the player cabinet, take the player to a trained technician for inspection. • This compact disc player uses a laser to read the music on the disc. The laser mechanism corresponds to the cartridge and stylus of a record player. Although this product incorporates a laser pick-up lens, it is completely safe when operated according to directions. • Discs rotate at high speed inside the player. Do not use damaged, warped, or cracked discs. • Do not touch the pick-up lens which is located inside the disc compartment. To keep dust from collecting on the pick-up lens, do not leave the compartment door open for an extended period of time. If the lens becomes dirty, clean it with a soft brush, or use an air blower brush designed for camera lenses. • The apparatus shall not be exposed to dripping and splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. • Main plug is used as the disconnet device, it shall remain operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the main plug of the apparatus shall be disconnected from the mains socket outlet completely. Important information Important battery information • Remove the batteries to avoid leakage if you do not use your remote control formore than one month. • Discard leaky batteries immediately as leaking batteries may cause skin burns or other personal injuries. Dispose of batteries in the proper manner, according to provincial and local regulations. • Any battery may leak electrolyte under the following circumstances: - if mixed with a different battery type, - if inserted incorrectly, - if all batteries are not replaced at the same time, - if disposed of in fire, or - if an attempt is made to charge a battery not intended to be recharged. Headset safety • Have a Blast-Just Not in your eardrums! Make sure you turn down the volume on the unit before you put on headphones. Increase the volume to the desired level only after headphone are in place. • Do not play your headset at high volume. Hearing experts warn against extended high-volume play. • If you experience ringing in your ears, reduce volume or discontinue use. • You should use with extreme caution or temporarily discontinue use in potentially hazardous situations. Even if your headset is an open-air designed to let you to hear outside sounds, do not turn up the volume so high that you are unable to hear what is around you. Don't infringe This product should only be used for the purposes for which it is sold, that is, entertainment, violating no copyright law. Any attempts to use this product for which it is not intended is unlawful and therefore not condoned by Thomson. Portions based upon Microsoft Windows Media Technologies. Copyright © 1999 Microsoft Corporation. All Rights Reserved. Microsoft, Windows Media, and the Windows Logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/ or other countries. The descriptions and characteristics given in this document are given as a general indication and not as a guarantee. In order to provide the highest quality product possible, we reserve the right to make any improvement or modification without prior notice. The English version serves as the final reference on all products and operational details should any discrepancies arise in other languages. Getting started Unpacking the system You should have the following: • one main unit (with 2 main speakers) • one remote control • one AM loop antenna • one user manual • owner registration card Back view 1. Main speaker jacks (high pass) 2. Woofer jacks (low pass) 3. AM loop antenna jack 4. FM pigtail antenna 1 4 3 2 Using FM and AM antennas Before you use your audio system, you'll want to make sure both the FM and AM antennas are positioned properly. Uncoil the FM antenna at the back of the unit, making sure it is fully extended (you may even want to tape it to the wall behind the unit if possible, the higher the better). You'll also need to connect the AM antenna loop to the back of the unit if you listen to AM stations. Rotate the AM loop antenna for better reception. Connecting main speakers Each speaker has a black/red wire and a black/ purple wire. When connecting the speakers, match the red/purple wires to the red/purple jacks and the black wires to the black jacks on the main unit. Speaker Wire Connection Push Speaker terminal tab down to insert wire. Release tab to lock wire in the terminal. NOTE: Make sure the insulation is completely removed from the ends of the speaker wires at all connection points. Installation To ensure sufficient ventilation, keep the spacing shown as below: 4" 4" 4" 4" 2" Front view Side view General controls Main unit MULTI FUNCTION DISPLAY GEFAHR EINES ELEKTRISCHEN SCHLAGS ON/STANDBY - to turn on or off (standby mode) the unit. Remember to unplug the power cord from the power outlet if you are not going to use the system for some time. SOURCE - to select among the CD player, Tuner, AUX and USB modes. CD REC - to start and stop recording from CD to the USB device. USB jack - to connect the USB device. Mass Storage Class (MSC) devices are supported. BAND/INFO - in CD mode, to select among the playback information. - in USB mode, to show the memory usage. - in mp3/wma disc mode, to show the track play time and ID3 tags information (e.g. song title, artist, album) during playback. - in tuner mode, to use as BAND key to change among the tuner bands. To enter the auto preset programming in the FM mode when pressed for 2 seconds. BASS BOOST - to turn on or off the Bass Boost. General controls DEMO/DIMMER - to activate or deactivate the display demostration. Press and hold to adjust the display brightness. - to open or close the disc tray. EQ - to select the equalizer presets. PROG/SET - to enter the program mode for CD, USB and tuner. - in USB mode, to enter the file rename operation. VOLUME - to adjust the volume. DISC 1/2/3/4/5 - to enter the CD mode and play the corresponding CD. - in CD, USB or mp3/wma disc mode, to start and pause the playback. - in CD, USB or mp3/wma disc mode, to stop the playback. - in mp3/wma disc mode, to return to the first track of the current disc; to display the total number of folders and total number of tracks on the current disc when playback is completely stopped. - in recording mode, to stop recording to the USB device. / - in CD, USB or mp3/wma disc mode, to go to the previous or next track; press and hold to search backward or forward within a track. - in tuner mode, to tune down or up the radio frequency. PREV/NEXT - in USB or mp3/wma disc mode, to go to the previous or next folder. - in tuner mode, to select the previous or next preset station. Phone and AUX IN Open the compartment door at the bottom of the main unit to reveal the jacks inside. PHONE - Jack for connecting headphones. AUX IN - Jacks for external sound input. General controls Remote control SOURCE E Q DEL ADD B.BOOST DISC SKIP PREV REV VOL VOL NEXT D FW PROG/SET STOP BAND/REPEAT FM ST./INTRO CLOCK TIMER SLEEP FOLDER /PRESET CD REC The remote control must be inserted with 2 "AAA" or "UM-4" or "R03" batteries prior to use. General controls SOURCE - to select among the CD player, Tuner, AUX and USB modes. - to mute the audio output. DEL - when reviewing the program, to remove track / file from the program list. - in USB mode, to remove file from the connected USB device. - in USB mode, to delete the current alphabet during file rename. ADD - in CD, USB or mp3/wma disc mode, to add tracks to the program list. - to turn the power on or off (STANDBY mode). EQ - to select the equalizer presets. B.BOOST - to turn on or off the Bass Boost. DISC SKIP - to skip to the next disc in CD mode. / - in CD, USB or mp3/wma disc mode, to go to the previous or next track; press and hold to search backward or forward within a track. - in tuner mode, to tune down or up the radio frequency. - in CD, USB or mp3/wma disc mode, to start and pause the playback. VOL +/- - to increase or decrease the volume level. PROG/SET - to enter the program mode for CD, USB and tuner. - in USB mode, to enter the file rename operation. STOP - in CD, USB or mp3/wma disc mode, to stop the playback. - in USB or mp3/wma disc mode, to return to the first track of the current disc in stop mode; to display the total number of tracks on the current disc when playback is completely stopped. - in recording mode, to stop recording to the USB device. BAND/REPEAT - in tuner mode, to change between the FM and AM radio bands; to enter the auto preset programming in FM mode when pressed for 2 seconds. - in CD mode, to repeat a track, a CD or all CDs. - in USB or mp3/wma disc mode, to select the repeat one file or repeat all files mode. FM ST/INTRO - to select between the stereo and mono sound in the FM tuner mode. - to turn the intro mode on or off to play the first 10 seconds of each track in CD, USB or mp3/wma disc mode. - to turn on or off random listening in CD, USB or mp3/wma disc mode. CLOCK - to enter the clock setting mode; to show the clock time. TIMER - to enter the timer setting mode; to turn on or off the timer. SLEEP - to select the time interval in minutes before the unit turns off automatically. FOLDER/PRESET / - in USB or mp3/wma disc mode, to select the previous or next folder. - in tuner mode, to select the previous or next preset stations. CD REC - to start and stop recording to the USB device. Display BASS - bass boost activated SLEEP - sleep mode activated REC - recording in progress PROG - program playback mode activated Source indication File format Radio bands SLEEP REC PROG ST Timer activated Folder navigation mode FM stereo mode activated Adjusting display brightness Press and hold DEMO/DIMMER to adjust the display brightness. Showing demonstration Press DEMO/DIMMER to turn on or off the demonstration mode. The demonstration scrolls through all display operations. CD tray status: Lights when loaded Flashes for the current disc Animates when playing REPEAT 1ALL DISCS INTRO Playback mode status Clock/Timer/Sleep timer Setting the clock 1. Press and hold CLOCK on remote control until the hour flashes on the display. 2. Press / to set the hour and then press CLOCK to shift to the minute digits. 3. Press / to set the minute. 4. Press CLOCK to save the setting or to quit setting without saving. When the unit is turned on, you can press CLOCK to display the current time for about 4 seconds. Setting the timer 1. Press and hold TIMER on the remote control until "ON" and the clock hour flashes on the display (ON - timer on time ). 2. To set the timer on time, press / to set the hour and then press TIMER to shift to minute digits. 3. Press / to set the minute. 4. Press TIMER to change to OFF (timer off time) with clock time flashing. Repeat steps 2 & 3 for the timer off time setting. 5. Press TIMER to select source. Press / to select among TUNER, DISC or USB. 6. Press TIMER to set the volume. Adjust VOLUME on the main unit or press VOL +/- or / on the remote control to select the desired volume level. 7. Press TIMER on the remote control to save and quit the settings. The timer is automatically activated once timer setting is saved. Activating the timer Press and release TIMER to turn on or off the timer. The timer icon is displayed when the timer is activated. Sleep mode You can select the time interval in minutes before the unit turns off automatically. Press SLEEP to select among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes. The SLEEP icon lights on the display when sleep mode is activated. View remaining sleep time When sleep mode is activated, press SLEEP once to view the remaining sleep time. Adjust sleep time Press SLEEP again when the remaining sleep time is displayed to change the sleep time. Sleep mode is automatically de-activated when the unit is turned off. Sound control Volume control Adjust VOLUME on the main unit or press VOL +/- on the remote control to adjust the volume level. The volume level shows briefly on the display to show the change in the volume level. Muting audio Press on the remote control to cut the sound. Press again to restore the sound. Bass boost Press BASS BOOST to turn boosting the bass frequency on or off . The "Bass" icon lights on the display when it is activated. Using preset equalizer curves Press EQ on the remote control to select among FLAT, ROCK, POP, JAZZ, CLASSIC and CUSTOM. The display shows your selection briefly. Creating a Custom Curve 1. Press EQ on the remote control to select the CUSTOM mode. 2. While CUSTOM is displayed, press / to cycle among the displayed bass- and treble-range levels. 3. While BAS or TRE is displayed, adjust the volume to set the associated gain between 10 - +10. 4. Press EQ to exit. Disc and USB playback Important CD and mp3/wma information CD-R / RW This unit is compatible with CD-RW/ CD-R discs for playback. Notes on CD-R/RW Disc: • Do not affix any type of labels to either side (recordable or labeled side) of a CD-R/ RW disc as this may result in malfunction. • To avoid damages to the CD-R/RW disc, do not open the disc compartment door while the disc is being read. • Do not load an unrecorded CD-R/RW disc into the unit. It may take a longer time to read the disc. • Playback capability for CD-RW discs may vary due to variations in the quality of the CD-RW disc and the recorder used to create the disc. Notes on mp3/wma Disc: • Use .mp3 as the extension when converting audio files into mp3 for saving onto CD-R/ RW, e.g. Abc08.mp3. Do not use any other extension e.g. .doc, .pdf. • Do not use the .mp3 extension for other text or non-audio data files as this may result in serious malfunction and harmful noise interference. • For better quality in mp3/wma disc playback, the CD quality should be recorded 128kbps or above. • Disc data size > 650MB is not recommended. • Total files and folders in the disc should not exceed 512, it also depends on the length of the file/ folder names. • For mixed mode discs, only one mode will be selected for playback depending on the recording format. • To ensure good performance, wait until the disc changer completely reads the disc before proceeding. • mp3 files in CD ROM EXTRA format disc cannot be recognized. Disc and USB playback Discs playback 1. Press SOURCE repeatedly to select the CD mode. 2. Press to open the disc compartment. 3. Insert up to 5 discs with the label facing up. 4. Press again to close the disc compartment. • The occupied disc tray icons light up on the display and the current disc icon flashes. • If the disc is a mp3/wma CD, the respective mp3 and wma icon lights on the display. 5. Press when the disc is stopped to begin playback. Press during playback to pause the disc. Press again to resume the playback. 6. During playback, press to stop the playback. Play and load simultaneously 1. Press to open the disc tray while a CD is playing. 2. Load/change discs for available trays. 3. Press again to close the tray. Selecting discs Press DISC 1 / DISC 2 / DISC 3 / DISC 4 or DISC 5 on the main unit to select a disc. Press DISC SKIP on the remote control to skip discs. USB playback 1. Insert the USB device's plug into the main unit's USB jack. 2. Press SOURCE repeatedly to select the USB mode. 3. Press when playback is stopped to begin playback. Press during playback to pause the playback. Press again to resume the playback. 4. Press to stop the playback. 5. Unplug the device to disconnect. • Be sure to remove all discs from the disc compartment before moving or transporting the unit! • Do not push to force closing of the tray during CD playback or tray opening. • Press DISC 1/ DISC 2 / DISC 3 / DISC 4 or DISC 5 to directly play the entire single CD. To play all discs in the unit, press in the CD mode. Disc and USB playback Information display In mp3/wma disc mode, press BAND/INFO on the main unit repeatedly during playback to show the ID3 tag information (e.g. song title, artist, album). When the mp3/wma disc is fully stopped, press to view the Folders Total (FT) and Track Total (TT) on the current disc. In USB mode, press BAND/INFO on the main unit to view used (U) and free (F) memory on the USB device. Track/folder selection 1. Press / next track. to skip to the previous or 2. Press and hold / to search through a track while it is playing. 3. For USB, mp3/wma disc, press FOLDER/PRESET / (or PREV/NEXT on the main unit) to skip to the previous or next folder. You can use / or FOLDER/PRESET / to select a track when playback is stopped. When a track is selected (with track number/name shows on the display), press within 10 seconds to start the playback. Disc and USB playback Playback sequence of disc • Check that the mp3/wma disc is created with a single folder structure. Refer to the diagram below for playback sequence details on multi-level folder structure. • For example, folders and songs from level 2 are played before moving on to play folders and songs from level 3. • Folder playback sequence is indicated by the letters A to G. • Song playback sequence is indicated by the numbers (1 to 15) in front of the song name. LEVEL 1 A Folder 1 B Folder 2 LEVEL 2 D Folder 1.1 E Folder 1.2 F Folder 2.1 LEVEL 3 8 Song 1.1.1 9 Song 1.1.2 10 Song 1.1.3 G Folder 1.2.1 11 Song 2.1.1 12 Song 2.1.2 LEVEL 4 13 Song 1.2.1.1 14 Song 1.2.1.2 15 Song 1.2.1.3 C Folder 3 3 Song 2.2 4 Song 2.3 5 Song 2.4 6 Song 3.1 7 Song 3.2 1 Song 4 2 Song 5 Intro/Repeat/Random playback Sampling tracks Press INTRO on the remote control to play the first 10 seconds of each track on the current disc, all discs in the tray, or turn the intro mode off. The INTRO icon is displayed when sampling is activated. Repeat Press BAND/REPEAT on the remote control to repeat the current track (REPEAT 1), current disc (REPEAT 1 DISC) , all discs (REPEAT ALL DISCS), or turn repeat mode off (ALL DISCS). Random playback Press on the remote control to turn on or off the random playback. The icon is displayed when it is activated. All the tracks on one disc will be shuffled and played once before shuffling and playing tracks from the next disc. • The first 99 tracks of each disc will be shuffled and played once before any of them is repeated. • Random playback can be activated simultaneously with repeat 1 disc (randomly play tracks from one disc repeatedly) or repeat all discs (randomly play tracks from all discs repeatedly). Program playback Setting up a program list 1. While playback is stopped for an audio CD, mp3/wma disc or USB device, press / to select the tracks to be added to the program list. 2. Press ADD to save the selected track into the next available program location. 3. Repeat steps 1 to 2 to store more tracks into program memory. • You can create a program of up to 32 tracks. • Only the first 99 tracks from each disc can be programmed. Playing a program list If you are not currently in the program mode, press PROG/SET and then to start the program playback. Displaying the program list 1. While playback is stopped, press PROG/SET to enter the program mode. 2. Press / to view each track assignment in the program list. Deleting from program list 1. While in the program mode, press / to select the track assignment to delete. 2. Press DEL. 3. Press / to select "Y" to delete or "N" to cancel the deletion. 4. Press DEL to confirm the selection. Deleting the entire program list 1. While in the program mode, press and hold DEL. 2. Press / to select "Y" to delete or "N" to cancel the deletion. 3. Press DEL to confirm the selection. Recording Recording CD to USB device 1. Connect the USB device to the main unit. 2. When the CD is paused or stopped, press CD REC to start the CD playback and recording will begin automatically. This is indicated by the REC icon on the display. 3. Press CD REC or to stop the recording. Example To record only the selected tracks from a CD: 1. Create a CD program (Refer to "Setting Up a Program List"). 2. From normal playback mode, press PROG. 3. Press CD REC, playback and recording will begin automatically. This is indicated by the PROG and REC icon on the display. 4. Press CD REC or to stop recording. • If CD playback is already started or paused, recording will start instantly from the time point which is playing or paused when CD REC is pressed. • Recording stops automatically when the CD stops (e.g. end of disc is reached). • The encoding bitrate for CD is 128 kbps. • Make sure "write protect" is turned off in the USB device during recording. Deleting a file from USB device 1. In the USB mode, select the file to delete using / . 2. Press DEL on the remote control. 3. Press / on the main unit to select "Y" to delete or "N" to cancel the deletion. 4. Press DEL to confirm the selection. Deleting all files from USB device In the USB mode, press and hold DEL on the remote control to delete all the files on the USB device. Repeat steps 3-4 of the above to delete all the files. Renaming files You can rename files in the USB device. 1. In the USB mode, press PROG/SET to enter the rename mode. 2. Adjust VOLUME on the main unit or press VOL + / - to select alphabets. 3. Press NEXT on the main unit or FOLDER/PRESET on the remote control to confirm the current alphabet and move to the next alphabet. • Press DEL to delete the current alphabet. • Press PREV or FOLDER/PRESET to edit the previous alphabet. 4. Press PROG/SET to confirm and store the new file name after editing the last alphabet. Radio Press SOURCE repeatedly to enter the tuner mode. Selecting tuner band Press BAND/INFO (or BAND/REPEAT on the remote control) to select between the FM or AM radio band. Tuning to a station Press / to adjust frequencies. Press and hold to start auto seaching for the next available station. Manually setting presets 1. Press / to access the desired frequency. 2. Press PROG/SET once. The most recently accessed program location will be displayed. 3. If a different program location is preferred, press / on the remote control to move to the desired preset number (1-32). 4. Press PROG/SET to store the selected frequency at that preset. Auto preset programming (FM only) Press and hold BAND/INFO (BAND/REPEAT on the remote control) for 2 seconds to scan stations in the FM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recovered. Note Accessing preset stations Press PREV/NEXT on the main unit or FOLDER/PRESET / on the remote control to access the previous or next preset station. The PROG icon lights up when a preset station is selected. The display first shows the preset program number and after a few seconds, the radio frequency will be displayed. Suppressing stereo signal Press FM ST/INTRO on the remote control to select between the FM mono and stereo modes. "ST" is displayed in the stereo mode. Troubleshooting tips System does not turn on • Check power cord for a secure connection. • Unplug the unit for a moment, and then plug it back in. • Check the outlet by plugging in another device. There is no sound • Increase the volume setting. • Check connection to speakers. • Check that you have selected the appropriate function: CD, Tuner or Aux. • Make sure mute is off. • Make sure headphones are not plugged in. Poor radio reception • Check antenna connection. • Move antenna. • Turn off nearby electrical appliances, such as hair dryer, vacuum cleaner, microwave oven or fluorescent lights. CD does not play • Check that CD is in the tray. • Check that CD label is facing up. • Check that PAUSE mode is not on. • Check that CD function is selected. • Use CD lens cleaner. • Clean the disc. • Try another CD. CD sound skips • Clean the disc. • Check disc for warping, scratches, or other damages. • Check if something is causing the system to vibrate. If so, move the system. • Make sure the speakers are at least 3 feet away or on a different surface from the main unit. CD button does not respond, or does not change discs when you press DISC SKIP • Switch to another function (Tuner) and then back to CD. Remote control does not work • Check that the batteries are properly installed. • Replace weak batteries. • Check that the system is plugged into power source. • Point the remote directly at the system's front panel. • Move closer to the system. • Remove any obstacles between the remote and the system. Note Maintenance Disconnect the audio system from the power source before performing any maintenance. Cleaning Clean the exterior of the system using a soft dust cloth. CD player CAUTION! This unit operates with laser and may only be opened by qualified technicians to avoid accidents. Handling CDs • Do not touch the recorded surface. Hold the CD by the perimeter or by the perimeter and the inner edge. • Do not affix labels or adhesive tapes to the label surfaces. • Do not scratch or damage the label. CDs rotate at high speeds inside the player. • Do not use damaged (cracked or warped) CDs Cleaning CDs • Dirty CDs can cause poor sound quality. Always keep CDs clean by wiping them gently with a soft cloth from the inner edge toward the outer perimeter. • If a CD becomes dirty, wipe it clean gently with a wet, soft cloth. Then wipe dry with a dry cloth. • Do not use record cleaning sprays or antistatic agents on CDs. Also, never clean CDs with benzene, thinner, or other volatile solvents which may cause damage to disc surface. CD lens care When your CD lens gets dirty it can also cause the system to output poor sound quality. To clean the lens you will need to purchase a CD lens cleaner which can maintain the output sound quality of your system. For instructions on cleaning the CD lens, refer to the ones accompanying the lens cleaner. Technical specifications Power supply: 120V~60Hz Dimensions ( H x W x D mm): Main unit - 374 x 310 x 495 Speaker - 374 x 286 x 495 Main unit weight: 7kg Speaker weight: 5.8kg CD player: Response curve (+/- 2dB): 60Hz to 5kHz Rating Plate: Refer to the back of the set. Warranty Limited warranty (United States) What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • One year from date of purchase for labor and parts • Warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first. What we will do: • Pay any Authorized RCA Audio Service Center the labor charges to repair your unit. • Pay any Authorized RCA Audio Service Center for the new or, at our option, refurbished replacement parts required to repair your unit. How you get service: • Take your unit to any Authorized RCA Audio Service Center. To identify your nearest Authorized RCA Audio Service Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900. • Show the Authorized Service Center Representative your evidence of purchase date or first rental. • Pick up your unit when repairs are completed. • Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period must be presented to obtain warranty service. For rental firms, proof of first rental is also required. What your warranty does not cover: • Customer instruction. (Your Owner's Manual describes how to install, adjust, and operate your unit. Any additional information should be obtained from your dealer.) • Installation and related adjustments. • Signal reception problems not caused by your unit. • Damage from misuse or neglect. • Cleaning of audio heads. • Batteries. • A unit that has been modified or incorporated into other products or is used for institutional or other commercial purposes. • A unit purchased or serviced outside the U.S.A. • Acts of nature, such as but not limited to lightning damage. Product Registration: • Please complete and mail the Product Registration Card packed with your product. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage. Limitation of Warranty: • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY THOMSON INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. • REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. THOMSON INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF Warranty INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. How State Law relates to warranty: • Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. • This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. If you purchased your unit outside the United States: • This warranty does not apply. Contact your dealer for warranty information. Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such service calls are the sole responsibility of the purchaser. IMPORTADOR Comercializadora Thomson de México, S.A. de C.V. Álvaro Obregón No. 151. Piso 13. Col. Roma. Delegación Cuauhtémoc C.P. 06700. México, D.F. Telefono: 52-55-11-020360 RFC: CTM-980723-KS5 EXPORTER Thomson Inc. P.O. Box 1976 Indianapolis, IN 46206 - 1976 ©2007 Thomson Inc. Trademark(s) ® Registered Marque(s) ® Deposée(s) Marca(s) ® Registrada(s) www.rcaaudiovideo.com Printed in China / Impreso en China