RCA RTD260 User Manual - RTD260 - Page 11
Mounting the Stands, Disconnecting the, Stands, Adjusting the Height of the Stands, Configuration 2
View all RCA RTD260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
RTD260 EN (07_06_06) 15/6/06 4:34 PM Page 13 Connections and Setup Mounting the Stands 1. Secure the speaker stand holder with the screw provided through the lower hole on the holder as illustrated. 2. Tighten the screw to fix the speaker on the speaker stand holder. EN Disconnecting the Stands Loose the screw which fixes the speaker on the speaker stand holder. Adjusting the Height of the Stands 1. Rotate the plastic lock anti-clockwise to release. 1 2. Adjust the height of the stand and hold. 3. Rotate the plastic lock clockwise to lock. Configuration 2 If placing the rear speakers (surround speakers) at the back is not a good choice for you, you can use the Front Surround sound 2 Effect(FSsE). Follow the following instruction for setting the speakers, speaker stands (optional) and the setup menu of the Player. 3 1. Setting the Speakers Mounting the Speakers Note: Match the front left and rear left speakers together and match the front right and rear right speakers together. 1. Place the front speaker upside down. 2. Slide in the hinge to the bottom of the front speaker until the 'click' sound is heard. 3. Slide in the rear speaker to the hinge until the 'click' sound is heard. 4. Attach the four rubber feet provided to the top of the front speaker. Illustrations contained in this document are for representation only. 9