Reebok 1810 Treadmill English Manual - Page 12

If You Do Not Connect The Con, Become Damaged When You Turn

Get Reebok 1810 Treadmill PDF manuals and user guides View all Reebok 1810 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

8. With the help of a second person, hold the console assembly near the Right Handrail (84) and the Left Handrail (not shown).  See the inset drawing. Connect the Upright Wire (81) to the console wire. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. 8 Console Assembly Console Wire 84 81 Wire Tie Console Wire 81 9. Set the console assembly on the Right and Left Handrails (84, 85). Make sure that no wires 9 are pinched. Insert the excess Upright Wire (81) into the Right Upright (90). Attach the console assembly to the brackets on the Handrails (84, 85) with the four 1/4" x 1/2" Screws (2) that you removed in step 7 and four 1/4" Star Washers (26; do not tighten the Screws yet. Console Assembly 84 26 81 2 90 85 26 2 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
12
8.
With the help of a second person, hold the con-
sole assembly near the Right Handrail (84) and
the Left Handrail (not shown).
See the inset drawing.
Connect the Upright
Wire (81) to the console wire.
The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Then, remove the wire tie from
the Upright Wire.
8
Console
Assembly
81
Wire
Tie
Console
Wire
81
84
9.
Set the console assembly on the Right and Left
Handrails (84, 85).
Make sure that no wires
are pinched.
Insert the excess Upright Wire (81)
into the Right Upright (90).
Attach the console assembly to the brackets
on the Handrails (84, 85) with the four 1/4" x
1/2" Screws (2) that you removed in step 7 and
four 1/4" Star Washers (26;
do not tighten the
Screws yet.
9
90
Console Assembly
2
81
84
26
Console
Wire
85
2
26