Reebok 1910 Treadmill English Manual - Page 16
Press the Left Base Cover 78 and the Right
View all Reebok 1910 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
15. Firmly tighten the four 3/8" x 2 3/4" Screws (7). 15 Then, tighten the four 3/8" x 1 1/4" Screws (8) (only one side is shown). 89 Press the Left Base Cover (78) and the Right Base Cover (89) onto the Base (92) until they snap into place. 78 7 8 92 16. Raise the Frame (56) to the position shown. Have a second person hold the Frame until 16 this step is completed. Orient the Storage Latch (53) so that the large barrel and the latch knob are oriented as shown. Attach the lower end of the Storage Latch (53) to the Base (92) with a 3/8" x 2" Bolt (3) and a 3/8" Nut (13). Attach the upper end of the Storage Latch (53) to the Frame (56) with a 3/8" x 1 3/4" Bolt (6) and a 3/8" Nut (13). Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 31). 13 Latch Knob 6 56 53 Large Barrel 92 13 3 17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see page 33). 16