Reebok 610 Bike English Manual - Page 14
Attach the Rear Upright Cover 57 to the Upright
View all Reebok 610 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
13. Identify and orient the Rear Upright Cover (57) as shown. 13 Attach the Rear Upright Cover (57) to the Upright (2) with an M4 x 16mm Screw (77). 57 77 2 14. Untie and discard the wire ties on the Main Wire (43), the Frame Pulse Wire (42), and the Receiver Wire (40). While a second person holds the Console (4) near the Upright (2), connect the wires on the Console to the Main Wire (43), to the Frame Pulse Wire (42), and to the Receiver Wire (40). 14 4 43 2 77 Insert the excess wires into the Upright (2). Tip: Start all the screws before tightening any of them. Also, avoid pinching the wires. Attach the Console (4) to the Upright (2) with four M4 x 16mm Screws (77). 42 40 Avoid pinching the wires 15. Identify and orient the Front Upright Cover (58) as shown. 15 Attach the Front Upright Cover (58) to the Upright (2) with two M4 x 16mm Screws (77). 77 58 2 14