Reebok 95 Axb Bench English Manual - Page 7
Attach a Dumbbell Tube 10 to the Rear
 |
View all Reebok 95 Axb Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Attach the Rear Stabilizer (3) to the Frame (1) with two M8 x 63mm Bolts (16), two M8 2 Washers (20), and two M8 Locknuts (24). Do not tighten the Locknuts yet. 16 20 3 1 24 3. Attach a Dumbbell Tube (10) to the Rear 3 Stabilizer (3) and the Front Stabilizer (2) with two M8 x 80mm Screws (13) and two M8 Washers (20). Do not tighten the Screws yet. Attach the other Dumbbell Tube (10) in the same way. Tighten the four M8 x 80mm Screws (13). See steps 1 and 2. Tighten the six M8 Locknuts (24). 10 2 20 13 20 13 3 4. Orient the Pivot Bracket (6) as shown and 4 attach it to the Backrest Frames (5) with four M8 x 38mm Bolts (18) and four M8 Locknuts (24). Do not tighten the Locknuts yet. 5 18 5 18 6 24 24 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
 |
 |
7
2.
Attach the Rear Stabilizer (3) to the Frame (1)
with two M8 x 63mm Bolts (16), two M8
Washers (20), and two M8 Locknuts (24).
Do
not tighten the Locknuts yet.
3.
Attach a Dumbbell Tube (10) to the Rear
Stabilizer (3) and the Front Stabilizer (2) with
two M8 x 80mm Screws (13) and two M8
Washers (20).
Do not tighten the Screws yet.
Attach the other Dumbbell Tube (10) in the
same way.
Tighten the four M8 x 80mm Screws (13).
See steps 1 and 2.
Tighten the six M8
Locknuts (24).
4.
Orient the Pivot Bracket (6) as shown and
attach it to the Backrest Frames (5) with four
M8 x 38mm Bolts (18) and four M8 Locknuts
(24).
Do not tighten the Locknuts yet.
2
4
1
24
16
3
20
20
13
20
13
10
3
2
5
5
24
24
18
18
6
3