Reebok Cyc4 English Manual - Page 5

1. Attach the Front Stabilizer (2) to the Frame (1) with two M8 x 70mm Carriage Bolts (72), two M8 Curved Washers (28), and two M8 Black Nylon Locknuts (56). Make sure that the Front Stabilizer is turned so the Roller (75) is not touching the floor. 1 72 75 2 2. Attach the Rear Stabilizer (3) to the Frame (1) with 2 two M8 x 80mm Carriage Bolts (63), two M8 Curved Washers (28), and two M8 Black Nylon Locknuts (56). 3. While another person holds the Handlebar Post (6) 3 near the Frame (1) as shown, connect the Upper Wire Harness (16) to the Lower Wire Harness (24). Next, insert the Handlebar Post into the Frame. Be careful not to pinch the Wire Harnesses. Slide the Round Collar (13) down the Handlebar Post (6) and press it into the Frame (1). Secure the Round Collar with a M6 x 10mm Screw (26). Note: There are two sets of holes in the Handlebar Post (6) so you can attach the Handlebar Post at either of two height settings. Choose the setting that you think will be the most comfortable. Secure the Handlebar Post to the Frame (1) with four M8 x 25mm Button Screws (27) and four M8 Curved Washers (28). 28 56 1 3 56 28 1 63 6 13 16 26 24 27 28 28 27 1 5