Reebok Ultimate Gym 5000 English Manual - Page 5
Storing The Weight Training System
View all Reebok Ultimate Gym 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ADJUSTING THE RESISTANCE To increase the resistance of the weight training system, pull a Bungee Cord (35) down and slide it into the Bungee Bracket (10). For more resistance, slide more Bungee Cords into the Bungee Bracket. ADJUSTING THE INCLINE The incline of the weight training system can be adjusted to change the resistance level of your workout. To adjust the incline, lift the Top Frame (1) until the Long Knob (58) on the Adjustment Bracket (48) can be pulled out of the adjustment hole in the Adjustment Leg (5). Slide the Adjustment Bracket to the desired position and insert the Knob into an adjustment hole. Note: Be sure that the Knob on the Adjustment Bracket is fully inserted into an adjustment hole in the Adjustment Leg. STORING THE WEIGHT TRAINING SYSTEM To store the weight training system, detach the Handlebar (29) from the Top Frame (1), and the Foot Plate (8) from the Bottom Frame (2), by removing the four L-Pins (17). Next, pull out the Short Knob (44) and slide the Bottom Frame as far into the Top Frame as it will go. Finally, adjust the system to the fully declined position. (See ADJUSTING THE INCLINE, above.) 10 35 1 48 Adjustment Holes 5 58 8 17 44 2 17 29 17 1 5