Ricoh 4110N Software User Guide - Page 257
WPA is connecting to authenticator., wpa link up
UPC - 026649028038
View all Ricoh 4110N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
Message List Message Problem and solutions The print server received error during attempt to log in to the network. Access to the network was denied. Verify that the print server name and password are correct. Login to the file server failed. The print server is not registered or a password is specified. Register the print server without specifying a password. trap account is unavailable. v3Trap cannot be sent. This could be because the Trap destination account is different from the account specified by the printer. usbd is disable. Plug and Play function and printing is disabled because usbd is disabled in the security mode. Enable usbd in the security mode. WINS name registration: No response to server WINS wrong scopeID= There was no response from the WINS server. Check the correct WINS server address is entered. Alternatively, check the WINS server is functioning properly. 6 An invalid scope ID was used. Use a valid scope ID. wpa authentication Failed WPA authentication failed. Check the WPA configuration. wpa authentication started WPA authentication has started. wpa IEEE802.1X started WPA authentication has started. wpa connecting to authenticator WPA is connecting to authenticator. wpa link up WPA key exchange has finished, and communication has been terminated. wpa probe response doesn't have IE. WPA probe response does not have IE. wpa success authenticated WPA authentication was successful. wpa success key received WPA key reception was successful. wpa waiting for key Waiting for WPA key. wpasupd start wpasupd has started. wpasupd stop wpasupd has ended. 255