Ricoh Aficio MP 6000 S/P General Settings Guide - Page 62
Parallel Interface, Parallel Timing, Parallel Communication Speed, Selection Signal Status
View all Ricoh Aficio MP 6000 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
System Settings Parallel Interface This section describes the user tools in the Parallel Interface menu under Interface Settings. Default settings are shown in bold type. 2 ❖ Parallel Timing Sets the timing for the control signal of the parallel interface. The default setting is ACK Outside. ❖ Parallel Communication Speed Sets the communication speed for the parallel interface. The default setting is High Speed. ❖ Selection Signal Status Sets the level for the select signal of the parallel interface. The default setting is High. ❖ Input Prime Sets whether to validate or invalidate the input prime signal upon receipt. The default setting is Inactive. ❖ Bidirectional Communication Sets the printer's response mode to a status acquisition request when using a parallel interface. The default setting is On. When set to [Off], bidirectional communication function will be disabled. Also, printer driver will not be installed under Windows Auto Detect function. ❖ Signal Control Sets procedure to error during printing. The default setting is Job Acceptance Priority. 52