Ricoh Aficio MP 6000 S/P Scanner Reference - Page 125
Custom Size, Specify Scan Area X3 and Y3 using the number keys, and then press
View all Ricoh Aficio MP 6000 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Items for Specifying Scan Settings D Specify Original Size (X1 and Y1) using the number keys, and then press the {q} key. For example, set X1 to 300 mm and Y1 to 200 mm. E Specify Start Position (X2 and Y2) using the number keys, and then press the {q} key. For example, set X2 to 30 mm and Y2 to 20 mm. F Specify Scan Area (X3 and Y3) using the number keys, and then press the {q} key. For example, set X3 and Y3 to 80 mm. 6 G Press [OK]. H Check Scan Area (X3 and Y3) displayed above [Custom Size], and then press [OK]. Note ❒ To scan an original that is smaller than 140 mm, make settings as though you were scanning a section of an original that is larger than 140 mm. 117
Items for Specifying Scan Settings
117
6
D
Specify Original Size (X1 and Y1) using the number keys, and then press
the
{
q
}
key.
For example, set X1 to 300 mm and Y1 to 200 mm.
E
Specify Start Position (X2 and Y2) using the number keys, and then press
the
{
q
}
key.
For example, set X2 to 30 mm and Y2 to 20 mm.
F
Specify Scan Area (X3 and Y3) using the number keys, and then press the
{
q
}
key.
For example, set X3 and Y3 to 80 mm.
G
Press
[
OK
]
.
H
Check Scan Area (X3 and Y3) displayed above
[
Custom Size
]
, and then press
[
OK
]
.
Note
❒
To scan an original that is smaller than 140 mm, make settings as though
you were scanning a section of an original that is larger than 140 mm.