Ricoh Aficio MP 9001 Operating Instructions - Page 62
When You Cannot Send or Receive Fax, Messages As Wanted
View all Ricoh Aficio MP 9001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
3. Troubleshooting When Using the Facsimile Function When You Cannot Send or Receive Fax Messages As Wanted This section describes likely causes of and possible solutions for transmission and reception-related problems. Transmission/Reception Problem 3 Both transmission and Cause The modular cord may be Solution Make sure the modular cord is correctly reception are impossible. disconnected. connected. See "Connecting the Machine to a Telephone Line and Telephone", Network and System Settings Guide . Transmission Problem Cause Solution Document appears blank at The original was placed the other end. upside down. When the original is placed directly on the exposure glass, the side to be scanned must face down. When the original is fed via the ADF, the side to be scanned must face up. Printed or sent images are spotty. The ADF, exposure glass, or scanning glass is dirty. Clean them. See "Maintaining Your Machine", About This Machine . Make sure ink or correction fluid is dry before placing originals. Transmission failed due to "maximum e-mail size" error. If the e-mail size specified on the machine is too large, the Internet Fax document cannot be sent. In [Facsimile Features], under [Send Settings], set [Max. E-mail Size] to [Off], or set the maximum e-mail size to a larger value. Then, re-send the document. 60