Ricoh Aficio SP 100SU e Product Guide - Page 4

Product Support Guide Model M101 / M102 / M103 Installation Installation Requirements Temperature Range: 15 C to 25 C (59 F to 77 F) Humidity Range: 30% to 70% RH Ambient Illumination: Less than 2,000 lux (do not expose the AIO to strong light, especially direct sunlight) Ventilation: Ambient Dust: 3 times/hr/person Less than 0.075 mg/m3 (2.0 x 10-6oz/yd3) Avoid areas exposed to sudden temperature changes: Areas directly exposed to cool air from an air conditioner. Areas directly exposed to heat from a heater. Do not place machine where it will be exposed to corrosive gas or vapor. Do not install the machine at any location over 2,000m (6,562 ft.) above sea level. Place the machine on a strong and level base. Inclination on any side should be no more than 5mm (0.2") Do not place the machine where it may be subject to strong vibrations. Machine level Front to back: within 5mm (0.2") of level Right to left: within 5mm (0.2") of level Power Requirements Input voltage level: 110 - 120 V, 60Hz: 6A Do not place anything on power cord. The required wall outlet is a NEMA 5-15R (receptacle) Space A (Front) B (Left) C (Rear) D (Right) 400mm (16") 100mm (4") 200mm (8") 100 mm (4") Foot Print Dimensions (W x D x H):M101: 402 x 368.5 x 119 mm (15.83" x 14.51" x 4.69".) M102: 402 x 368.5 x 163 mm (15.83" x 14.51" x 6.42".) M103: 402 x 368.5 x 205 mm (15.83" x 14.51" x 8.07".) Note: Measuring conditions: Front door closed. Rear vertical paper tray, not extended. Ver.1.0 Page 4 of 18 Subject to change without notice 6/26/2012