Ricoh C210SF Support Guide - Page 11
Installation Requirements, Environment, Power Requirements, Transporting The Printer After - printer direct
UPC - 026649025310
View all Ricoh C210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Product Support Guide G157 Installation Requirements Environment 1. Temperature range: 50 - 90.5°F 2. Humidity range: 15 - 80%RH 3. Do not install the machine in an area that is exposed to direct sunlight. 4. Do not install the machine in a space with poor airflow. 5. Do not expose the machine to a sudden temperature change, which include: Direct cool air from an air conditioner Direct heat from a heater 6. Do not install the machine in an area that can be exposed to corrosive gas. 7. Install the machine at a location lower than 8200 ft. 8. Install the machine on a strong, level base. 9. Do not install the machine in an area that can be subjected to strong vibrations. Power Requirements 1. Input voltage level: 120 V, 60 Hz 2. Permissible voltage fluctuation: ±10 % 3. Do not put or place anything on the power cord Transporting The Printer After Installation 1. You need two or more people to move the machine. The machine weighs approximately 77lbs without optional units. Before you turn off the main power, move the CIS to the shipping position with Maintenance function 06. Note: End users can perform maintenance function 06 by themselves. Remember to inform them to use this function before they move the machine. 2. Keep the machine level while you move it. 3. Put the machine on a flat area. Make sure that the whole part of the base supports the weight of the machine. 4. Whenever possible, use the padding provided in the original package to repack machine. 5. Remove the following units and components: • Photoconductor unit • Optional paper feed unit • Paper NOTE: Do not remove the waste toner bottle. If you remove it, waste toner may fall from the waste toner path. 6. Protect the photoconductor unit surface with paper or cloth. 7. Clean the units accessible and components in the printer. 8. Secure the paper tray and all exterior covers with appropriate tape. Version 1.3 11