Ricoh CL7000 Operating Instructions - Page 53

Paper Recommendations • When printing on envelopes, use the bypass tray, and select [Thick Paper] as the paper type on the Paper Input menu on the control panel. See p.59 "Specifying a paper type for the Bypass Tray". • Specifications for envelopes are as follows: Weight Recommended weight and size Metric version 72 - 90 g/m2 72 g/m 2, 114 × 162 mm (C6 Env) Inch version 19 - 24 lb 24 lb, 37/8" × 71/2" (Monarch) • You can load up to 10 envelopes (72 - 92 g/m2, 19 - 24 lb) in the bypass tray at the same time, without compressing them. Check the envelopes are not 3 damp, and the top of the stack is not higher than the limit mark on the side guide. • Check the print side is facing up when loading onto the bypass tray. • When loading envelopes, be sure to unfold the flaps and position them opposite to the paper feed direction. • Make the printer driver setting for rotating the print image by 180 degrees. For details, see the printer driver Help. • Check there is no air in the envelopes before loading. • To get better print quality, it is recommended that you set the right, left, top, and bottom print margin, to at least 15 mm (0.6") each. • Do not print on both sides of envelopes. • Load only one size and type of envelope at a time. • Before loading envelopes, flatten leading edges (the side going into the printer) by pressing a pencil or ruler across them. • Before loading envelopes, check they are rectangular in shape. • Supported sizes for envelopes are listed on p.39 "Paper and Other Media". 47