Ricoh IM 430Fb User Guide - Page 58
Specify the IP address for the USB device server using the Add Standard TCP/IP Printer Port
View all Ricoh IM 430Fb manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
1. Getting Started 4. Specify the IP address, Subnet Mask, and Default Gateway. When DHCP is enabled, the IP address can be obtained automatically from a network device with the DHCP server function. 5. Configure the other settings as necessary, and then click [Submit]. 6. Exit the web browser. 7. Disconnect the Ethernet interface cable from the computer used for setup, and then connect the cable to a network device, such as a hub. 8. Set the IP address of the USB device server in the printer driver used for printing. • The USB device server does not support "Quick Install" and installation using the SmartDeviceMonitor for Client port. A port must be set independently when a printer driver is installed. • To print using Port 9100 or LPR, see Driver Installation Guide and make the following settings: 1. Specify the IP address for the USB device server using the "Add Standard TCP/IP Printer Port Wizard". 2. Select "Custom" for the device type. 3. For Port 9100, select "Raw" as the protocol, and then specify "9100" for the port number. For LPR, select "LPR" as the protocol, and then specify "lp" as the queue name. • For IPP printing, see "Using the IPP port", Driver Installation Guide. To specify the URL of the machine during the procedure for adding printers, enter "http://(IP address of the USB device server) /ipp/lp". 56