Ryobi AP1301 English Manual
Ryobi AP1301 Manual
 |
View all Ryobi AP1301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Ryobi AP1301 manual content summary:
- Ryobi AP1301 | English Manual - Page 1
dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Thank you for your purchase. SAVE THIS - Ryobi AP1301 | English Manual - Page 2
� Features...10-11 Loose Parts ...11 � Assembly ...12-13 � Operation...14-16 Adjustments...17 � Maintenance ...18-19 Troubleshooting ...20 � Parts Ordering / Service ...22 INTRODUCTION This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and - Ryobi AP1301 | English Manual - Page 3
or serious personal injury. READ ALL INSTRUCTIONS KNOW YOUR POWER TOOL. Read the operator's manual carefully. Learn the tool's applications and safer performance. Follow instructions for lubricating and changing accessories. DISCONNECT TOOLS. When not in use, before servicing, or when changing - Ryobi AP1301 | English Manual - Page 4
QUALIFIED ELECTRICIAN or service personnel if the grounding instructions are not completely manual or addendums. Use of accessories that are not listed may cause the risk of personal injury. Instructions and the cutter head blade path. SUPPORT THE WORKPIECE ADEQUATELY at all times during operation - Ryobi AP1301 | English Manual - Page 5
be replaced only by the manufacturer or by an authorized service center to avoid risk. SAVE THESE INSTRUCTIONS. Refer to them frequently and use to instruct other users. If you loan someone this tool, loan them these instructions also. WARNING: Some dust created by power sanding, sawing, grinding - Ryobi AP1301 | English Manual - Page 6
Wet Conditions Alert Do not expose to rain or use in damp locations. Read The Operator's Manual To reduce the risk of injury, user must read and understand operator's manual before using this product. Eye Protection Safety Alert Always wear safety goggles, safety glasses with side shields - Ryobi AP1301 | English Manual - Page 7
to use this product until you read thoroughly and understand completely the operator's manual. If you do not understand the warnings and instructions in the operator's manual, do not use this product. Call Ryobi customer service for assistance. WARNING: The operation of any power tool can result in - Ryobi AP1301 | English Manual - Page 8
distance. A line that can support one power tool may not be able to support two or three tools. GROUNDING INSTRUCTIONS In the event of a malfunction a live terminal. Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as - Ryobi AP1301 | English Manual - Page 9
in reference to blade movement. Freehand Performing a cut without the workpiece being guided by a fence, miter gauge, or other aids. Gum A sticky, sap workpiece by cutter blades when the workpiece is not properly supported. Through Sawing Any cutting operation where the blade extends completely - Ryobi AP1301 | English Manual - Page 10
FEATURES PRODUCT SPECIFICATIONS Feed Rate 26 FPM No Load Speed 10,000 r/min. (RPM) Motor 2 HP Peak Input 120 V, AC Only, 60Hz, 15 A Max Planing Height 6 in. Max. Planing Width 13 in. Max. Planing Depth 1/8 in. Net Weight 53.5 lbs. DEPTH ADJUSTMENT HANDLE SWITCH KEY POWER SWITCH DUST - Ryobi AP1301 | English Manual - Page 11
thickness scale accurately displays the height of the cutter blades to a maximum of 6 in. WORK TABLE The work table supports your workpiece. LOOSE PARTS 3 2 6 5 1 4 Key No. 1 2 3 4 5 6 Fig. 3 Description Qty. Depth Adjustment Handle ...1 Screw ...1 Switch Key...1 Magnetic Blade Wrench - Ryobi AP1301 | English Manual - Page 12
ASSEMBLY UNPACKING This product requires assembly. Carefully remove the tool and any accessories from the box. Place it on a level work surface. NOTE: This tool is heavy. To avoid back injury, lift with your legs, not your back, and get help when needed. Inspect the tool carefully to make sure - Ryobi AP1301 | English Manual - Page 13
, make sure bolts are long enough to go through holes in planer base, the material being mounted to, and the lock washers and hex nuts. Supporting surface where planer is mounted should be examined carefully after mounting to insure that no movement during use can result. If any tipping or walking - Ryobi AP1301 | English Manual - Page 14
thin test cuts on a scrap piece of wood first to determine potential problems with the workpiece. PLANING TIPS Thickness planers work best if at least their wear. Refer to the Maintenance section of this operator's manual for instructions on how to remove and replace or turn the cutter blades. - Ryobi AP1301 | English Manual - Page 15
workpiece by cutter blades, can occur when the board is not properly supported. Although snipe may be barely noticeable, it is important to keep the longer than 48 in., greater care must be taken to reduce the problem because the additional length means more of the total weight is unsupported by - Ryobi AP1301 | English Manual - Page 16
. If measurements are not exact, see Adjustments section for further instructions. Before each use of the planer, check for loose fasteners, into the planer. NOTE: Boards longer than 24 in. should have additional support from free-standing material stands. Push slightly on the board and allow - Ryobi AP1301 | English Manual - Page 17
ADJUSTMENTS WARNING: Before performing any adjustment, make sure the tool is unplugged from the power supply. Failure to heed this warning could result in serious personal injury. THICKNESS SCALE ADJUSTMENT See Figure 9. The thickness scale, located on the right front of the planer, shows the depth - Ryobi AP1301 | English Manual - Page 18
MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses - Ryobi AP1301 | English Manual - Page 19
MAINTENANCE Using the open-end wrench, carefully loosen the blade locking screws ( 1 ). Using the notched end of the magnetic blade wrench, remove the blade from the cutter head by hooking the notch over the end of the blade and pulling straight out. Use the magnet on the other end of the tool - Ryobi AP1301 | English Manual - Page 20
TROUBLESHOOTING Problem Possible Cause Solution Snipe (depressions at ends of Dull cutter height difficult to Dirty spindle adjust Worn chain Clean and lubricate spindle. Have service performed by an authorized service center. Will not start Not plugged in Blown circuit Motor failure Loose - Ryobi AP1301 | English Manual - Page 21
NOTES 21 - Ryobi AP1301 | English Manual - Page 22
OPERATOR'S MANUAL 13 in. PORTABLE PLANER AP1301 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
 |
 |
Your portable planer has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR’S MANUAL
13 in. PORTABLE PLANER
AP1301