Ryobi BGH616 English Manual - Page 4

Do Not Use Tool If Switch Does Not Turn - accessories

Get Ryobi BGH616 PDF manuals and user guides View all Ryobi BGH616 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

GENERAL SAFETY RULES  Inspect TOOL CORDS periodically. If damaged, have repaired by a qualified service technician at an authorized service facility. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal. Repair or replace a damaged or worn cord immediately. Stay constantly aware of cord location and keep it well away from the rotating grinding wheels.  Inspect EXTENSION CORDS periodically and replace if damaged.  DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by an authorized service center.  USE ONLY CORRECT WHEELS. Do not use wheels with incorrect size holes. Never use wheel washers or wheel bolts that are defective or incorrect. The maximum wheel capacity of your grinder; BGH616 is 6 in and BGH827 is 8in.  Never touch wheel or other moving parts during use.  NEVER START A TOOL WHEN ANY ROTATiNG COMPONENT IS IN CONTACT WITH THE WORKPIECE.  DO NOT operate A tool while under the influence of drugs, alcohol, or any medication.  When servicing use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.  Use only recommended accessories listed in this manual or addendums. Use of accessories that are not listed may cause the risk of personal injury. Instructions for safe use of accessories are included with the accessory.  DOUBLE CHECK ALL SETUPS. Make sure wheel is tight and not making contact with workpiece before connecting to power supply. 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
4
INSPECT TOOL CORDS PERIODICALLY.
If
damaged, have repaired by a qualified service technician at
an authorized service facility. The conductor with insulation
having an outer surface that is green with or without yellow
stripes is the equipment-grounding conductor. If repair
or replacement of the electric cord or plug is necessary,
do not connect the equipment-grounding conductor to a
live terminal. Repair or replace a damaged or worn cord
immediately. Stay constantly aware of cord location and
keep it well away from the rotating grinding wheels.
INSPECT EXTENSION CORDS PERIODICALLY
and
replace if damaged.
DO NOT USE TOOL IF SWITCH DOES NOT TURN IT
ON AND OFF.
Have defective switches replaced by an
authorized service center.
USE ONLY CORRECT WHEELS. Do not
use wheels
with incorrect size holes. Never use wheel washers
or wheel bolts that are defective or incorrect. The
maximum wheel capacity of your grinder; BGH616 is
6 in and BGH8±7 is 8in.
GENERAL SAFETY RULES
NEVER TOUCH WHEEL
or other moving parts during
use.
NEVER START A TOOL WHEN ANY ROTATING
COMPONENT IS IN CONTACT WITH THE
WORKPIECE.
DO NOT OPERATE A TOOL WHILE UNDER THE
INFLUENCE OF DRUGS, ALCOHOL, OR ANY
MEDICATION.
WHEN SERVICING
use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
USE ONLY RECOMMENDED ACCESSORIES
listed
in this manual or addendums. Use of accessories that
are not listed may cause the risk of personal injury.
Instructions for safe use of accessories are included
with the accessory.
DOUBLE CHECK ALL SETUPS.
Make sure wheel is
tight and not making contact with workpiece before
connecting to power supply.