Ryobi CSB144LZK User Manual - Page 13
Adjustments
View all Ryobi CSB144LZK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ADJUSTMENTS WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when making adjustments. 0° BEVEL STOP See Figure 22, page 17. The saw has a 0° bevel stop that has been factory adjusted to assure 0° angle of the saw blade plate when making 90° cuts. CHECKING 0° BEVEL STOP Remove battery pack. Place the saw in an upside down position on a workbench. Check the squareness of the saw blade plate to the base of the saw using a carpenter's square. ADJUSTING 0° BEVEL STOP Remove battery pack. Loosen bevel adjustment knob. Loosen hex nut securing adjusting screw. Turn adjusting screw and adjust base until square with saw blade. Tighten hex nut and bevel adjustment knob securely. Clamp straight edge to workpiece. Draw a guideline by measuring 1 in. parallel to strait edge. Square circular saw against straight edge. Install the battery pack into the tool. Depress and hold lock-off button to turn on laser. Using a 1/8 in. flat head screwdriver, turn laser adjusting screw counterclockwise to adjust laser to left or clockwise to adjust laser to the right. Adjust laser so that it lines up with guideline. DANGER LASER RADIATION-AVOID DIRECT EYE EXPOSURE MAX OUTPUT