Ryobi DS1100 English Manual
Ryobi DS1100 Manual
 |
View all Ryobi DS1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Ryobi DS1100 manual content summary:
- Ryobi DS1100 | English Manual - Page 1
MANUAL DETAIL SANDER MODEL DS1100 DOUBLE INSULATED Sanding Pad No load speed Motion Rating Input Paper type Arc size SPECIFICATIONS: Triangle shaped 12,000 spm Oscillating 120 volts, 60 Hz, AC .30 amperes Pressure sensitive adhesive backed 3.0 mm at tip THANK YOU FOR BUYING A RYOBI DETAIL SANDER - Ryobi DS1100 | English Manual - Page 2
INSTRUCTIONS practical way to secure and support the workpiece to a stable platform parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. s Use only accessories - Ryobi DS1100 | English Manual - Page 3
of injury. s When servicing a tool, use only identical replacement parts. Follow instructions in Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury. Specific Safety Rules for Sanders s Hold tool by - Ryobi DS1100 | English Manual - Page 4
explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANING SAFETY ALERT SYMBOL: Indicates danger, warning - Ryobi DS1100 | English Manual - Page 5
with coarse, medium, and fine grit sandpaper. It will produce a fine scratch free finish when used to sand with the grain on wood surfaces. By purchasing optional accessories, it can also be used as a polisher or scraper. Before attempting to use your sander, familiarize yourself with all operating - Ryobi DS1100 | English Manual - Page 6
proceed as follows. s Carefully peel paper backing from new sandpaper. s Position sandpaper into place, then carefully press sticky side of sandpaper on rubber pad. WARNING: Never use your detail sander for wet sanding or liquid polishing. Failure to comply can result in electrical shock causing - Ryobi DS1100 | English Manual - Page 7
and backward or side to side strokes. Upon completion of sanding operation, always remove sander from workpiece before turning it off. DO NOT FORCE. The weight of the unit supplies adequate pressure, so let the sandpaper and sander do the work. Applying additional pressure only slows the motor - Ryobi DS1100 | English Manual - Page 8
servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL Avoid using solvents when cleaning plastic parts 16 is recommended for an extension cord 100 feet or less in length. When working sanding area and position the cord so - Ryobi DS1100 | English Manual - Page 9
Blade 10 pack 10 pack 10 pack 10 pack 10 pack 10 pack 10 pack 5 pack 5 pack 5 pack 5 pack Individual sanding grits are available in economical 10 sheet packs. OPTIONAL POLISHING PADS The rubber pad supplied with your detail sander allows you to easily fit the optional wax applicator/polishing - Ryobi DS1100 | English Manual - Page 10
19 18 17 16 RYOBI DETAIL SANDER - MODEL NUMBER DS1100 2 3 47 21 5 6 14 10 9 8 2 12 11 15 3 13 WARNING: THE FOOT COVER, KEY NUMBER 19, INSULATES THE CAP SCREW, KEY NUMBER 20, MAKING IT PART OF THE DOUBLE INSULATED SYSTEM. THEREFORE, IT MUST ALWAYS BE REPLACED WHEN REPLACING PARTS OR MAKING - Ryobi DS1100 | English Manual - Page 11
RYOBI DETAIL SANDER - MODEL NUMBER DS1100 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your DETAIL SANDER or when ordering repair parts. PARTS LIST Key No. Description Quan. 1 Data Plate 1 2 Screw (#6- - Ryobi DS1100 | English Manual - Page 12
OPERATOR'S MANUAL Detail Sander Model DS1100 Double Insulated EXTENSION CORD CAUTION When using a power on 12 gauge - 20 amp circuit. • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
OPERATOR'S MANUAL
DETAIL SANDER
MODEL DS1100
DOUBLE INSULATED
SAVE THIS MANUAL FOR FUTURE REFERENCE
SPECIFICATIONS:
Sanding Pad
Triangle shaped
No load speed
12,000 spm
Motion
Oscillating
Rating
120 volts, 60 Hz, AC
Input
.30 amperes
Paper type
Pressure sensitive adhesive backed
Arc size
3.0 mm at tip
THANK YOU FOR BUYING A RYOBI DETAIL SANDER.
Your new Detail Sander has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new sander.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your sander properly and only for what
it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi tools.