Ryobi ES3001 Operation Manual - Page 1
Ryobi ES3001 Manual
View all Ryobi ES3001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Thank you for purchasing RYOBI™ Phone Works™ If you need assistance TM DO NOT RETURN TO THE STORE TM Please contact us at 1-877-578-6736 This app is optimized for: iOS versions 6.0 and higher ∙ Android versions 4.0 and higher For a full list of compatible phones please visit www.ryobitools.com/phoneworks ES5001 INSPECTION SCOPE IMPORTANT SAFETY INSTRUCTIONS WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. Read operator's manual carefully. Learn the applications and limitations, as well as the specific potential hazards, related to this device. Following this rule will reduce the risk of electric shock, fire, or serious injury. Do not operate battery devices in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Battery devices create sparks which may ignite the dust or fumes. Do not disassemble the device. Contact with internal parts may increase the risk of electric shock or cause damage to the device. Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the device in unexpected situations. Do not store the device in an area of high heat or humidity. Do not expose the device to extended high heat from the sun (such as on a vehicle dashboard.) To reduce the risk of serious personal injury, do not store outside or in vehicles. Damage to the device or the battery can result. Do not expose device to rain or wet conditions. Water entering a device will increase the risk of electric shock. Use the device in accordance with these instructions and in the manner intended for the device, taking into account the environmental conditions and the work to be performed. Use of the device for operations different from those intended could result in a hazardous situation. Do not use the inspection scope for diving or any other prolonged underwater use. The plastic housing is not waterproof. The camera cable is waterproof to 1M. Ensure the device is disconnected and turned off before inserting or changing batteries. Do not mix old and new batteries or different brands of batteries. Remove batteries from the device when not in use for an extended time. Always replace the alkaline battery with the same type of alkaline battery. Use of any other battery packs may create a risk of injury and fire. This device should not be operated unless the battery compartment is closed. Do not place battery devices or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury. Do not crush, drop or damage battery. Do not use batteries that have been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately. Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any battery device in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately. Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury. Save these instructions. Refer to them frequently and use them to instruct others who may use this device. If you loan someone this device, loan them these instructions also. App images may vary. 1 - English 995000201 1-30-18 (REV:03)